Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for ROSSO MOTORS X3
- Page 1 INSTALLATIONANDOPERATING INSTRUCTIONS WARNING: Assembly by an adult . This toy is unsuitable for children under 3 years due to its maximum speed. Executive standard: En71 and En62115 ASTM F963-17 Photos are for reference ONLY.
-
Page 2: Installation Instruction
water (swimming pools) or other bodies of water, sloped surfaces, hills, INSTALLATION INSTRUCTION wet areas, flammable vapors, in alleys, at night or in the dark could result in an unexpected accident. Always use the vehicle in a safe, secure environment with continuous adult supervision. -
Page 3: User Requirements And Warnings
CARE WARNINGS immediately give the person water or milk. Do not give water or WARNING! milk if the patient is vomiting or has a decreased level of alertness. Do not induce vomiting. Park the vehicle indoors or cover it with a tarp to protect it from wet weather. -
Page 4: Specification
Specification Parts List specification Name PICTURE PICTURE Battery 24V 7Ah ( 12-FM-7 ( Ah ) ) * 1 Motor DC 24V ( motor 550*2) B(Wheel) A(Rear axle) Suitable age 37-96 months Max weight 120X80X85CM Body size D(Wheel cover) E(handlebar) Speed 3.8-7.5KM/H Hours of use charging 8-12 hours, using 1- 2 hours... -
Page 5: Installation Steps
Installation Steps Step1-3: Install front axle Use the G (M8 spanner) to unscrew [4] nut on the M[front axle] Step 1-1: Install front axle First lift the whole front axle subassembly as shown, then buckle it down into the groove Step1-4: Install front axle Step 1-2: Install front axle Install the M( the front axle) to the car body as shown, then screw up [4] nut... - Page 6 Step2-1: Install rear axle First lift the whole rear axle subassembly as shown, then buckle it down into the groove Step 2-2: Install rear axle Step3: Install wheels 1. first unscrew the [7] nut from A( the rear axle)in counterclockwise. 1.
- Page 7 step6: Power connection Connect terminal to swith on the power, then install the seat again. [10] [11] [11] Step 4: Install handlebar Hold Handlebar E, Fit Square Hole [10] of Handlebar over Share Steering Shaft [11] as shown.Use screwdriver to install the N(screw arbor) to handlebar center, screw it in clockwise.Do not over-tighten.
- Page 8 Direction for use 2.Remote control in change direction: Press Steer Left, the car will turn left; press steer right, the car will turn right. 3.Instruction for MP3 multifunction player tail box unlock switch R (Turn to anti - tail box unlock switch R (Turn to anti - clockwise position to unlock the box;...
-
Page 9: Charging Instructions
8.Charging instructions. 6. Use of car rear hopper WARNING! unlock the lock outward as shown, and you can turn over the hopper Please plug wall charger directly into a wall outlet. Do not use anextension cord. 7.Instructions of the recoverable fuse When the battery is low, please charge it immediately. - Page 10 Trouble elimination methods 1.Yes, the fuse cuts off the power 1. Is the fuse overloaded? automatically by 5-20 seconds, then 2. The pedal switch connector is restart; No, check next reason analysis The motor good? 2.No, repair foot switch ; Yes, check next 3.
Need help?
Do you have a question about the X3 and is the answer not in the manual?
Questions and answers