Download Print this page

PVP Communications Freedom Series Installation And Operating Instructions

Wireless helmet communications

Advertisement

Quick Links

CHARGING
Speakermic: powered by Portable Radio. No charging necessary.
Remote PTT: powered by Motorcycle battery. No charging necessary.
Headset: powered by an internal Li-Ion battery. Use the charger
supplied with the headset to charge. DO NOT use any other charger
other than the charger provided with this headset.
NOTE: For longer battery life, LEAVE HEADSET POWERED ON and
the charger connected to the headset while not in use, preferably in a
cool dry environment.
NOTE: A fully charged battery will last a minimum of 16 hours
(continuous audio). Although the battery may last for more than one
day's use, it is recommended that it be charged daily. Always leave the
headset charging when not in use.
NOTE: Li-Poly batteries do not have the memory issues found on Ni-
Cad batteries. Therefore it is not necessary to fully drain the battery
before charging.
IMPORTANT: If the internal Li-Ion battery in the headset were to
fail, the Shouldermic will continue to operate with the portable radio.
CHARGER—STATUS LED
Green (no shouldermic
connected) = ready to charge
Green (connected to shouldermic)
= Fully charged battery
Red = Charging
The Bluetooth
word mark and logos are registered trademarks owned by
®
Bluetooth SIG, Inc. and any use of such marks are under license.
Freedom
Wireless is a trade-mark of PVP Communications.
All Freedom
Wireless shouldermic are protected by
U.S. Patent No. 6,311,052 & 7,062,301
INSTALLATION
and
OPERATING
INSTRUCTIONS
Freedom
Wireless Helmet
Communications
United States Patent No.
6,311,052 & 7,062,301
2310 W 205th Street
Torrance, California 90501
(800)584-4119
www.pvpcom.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the Freedom Series and is the answer not in the manual?

Questions and answers

Summary of Contents for PVP Communications Freedom Series

  • Page 1 ® 6,311,052 & 7,062,301 Bluetooth SIG, Inc. and any use of such marks are under license. Freedom Wireless is a trade-mark of PVP Communications. ™ All Freedom Wireless shouldermic are protected by ™...
  • Page 2 This warranty gives you specific legal rights Flash every 7 seconds which vary from state to state. PVP Communications, Inc. reserves the right to = paired, in stand-by make changes in design and to make improvements in its products without the...
  • Page 3 PAIRING Freedom Wireless Speakermics ™ PAIRING PROCEDURE: Each Headset must be dedicated (“Paired”) to its corresponding Speakermic and Remote PTT before operation. Follow the steps below to Pair: NOTE: Prior to pairing, confirm no other Bluetooth devices are in the immediate area – other devices can potentially dis- (Push-to-talk) rupt the pairing process.
  • Page 4 CONTROLS: DESCRIPTION Headset Power The Freedom Series SPO (Simple Portable Only) is Halfshell Helmets—black momentary pushbutton switch located on the designed for Motor Officers who want the ability to left earcup communicate using their Portable Radio while rid- Fullshell Helmets—black momentary pushbutton switch located in the ing their Motor and wearing a helmet.