Parallel Switch (If Equipped With Dual Shore Power) - Meridian 441 SEDAN Owner's Manual

441 Sedan • Owner's Manual

Parallel Switch (If Equipped with Dual Shore Power)

• When using the parallel switch do NOT exceed 30 total amps.
• The amperage of each component breaker is shown on the breaker itself.
• The voltage on each line can be read on the voltmeter on the 110-volt AC master panel.
When only one dockside outlet is available, you can use the parallel switch to provide power to both lines.
1. Connect to shore power as described in the Connecting to Shore Power section on the previous page.
2. Switch the parallel switch (transfers power from line 1 to line 2) On instead of the "SHORE POWER 2"
master breaker.
3. Turn On the individual component breakers as required.
NOTICE
Chapter 11: Electrical Systems
91