Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Catler IH 4010
- Page 1 INDUCTION HOB Instruction Manual INDUCTION HOB IH 4010...
- Page 2 INDUCTION...
-
Page 3: Table Of Contents
TABLE OF CONTENTS Catler recommends safety first Know your IH 4010 induction hob Operating your IH 4010 induction hob Care and cleaning Troubleshooting TABLE OF CONTENTS... -
Page 4: Catler Recommends Safety First
CATLER RECOMMENDS SAFETY FIRST We understand the importance of safety and that’s why we put your safety first from the initial design concept to the production itself. Nevertheless, please be careful and follow the instructions below when using this appliance. • This appliance may be used by children 8 years... - Page 5 IT IS FORBIDDEN TO SWITCH ON THE APPLIANCE WHILE DISHES ARE PLACED ON THE HOTPLATE WITHOUT ANY FOOD INSERTED. A HEATED HOTPLATE REMAINS HOT EVEN WHEN THE COOKING IS FINISHED. PLEASE DO NOT TOUCH THE HOTPLATE WITH YOUR HANDS WHILE IT’S HOT. CATLER RECOMMENDS SAFETY FIRST...
- Page 6 Liquids or meals may not be heated in closed containers, such as cans, as an explosion could result. • Take special care if oil or fat is used for cooking. If fat or oil is heated to a high temperature, it may catch fire. CATLER RECOMMENDS SAFETY FIRST...
- Page 7 Otherwise, there is a risk of personal injury. • Any maintenance other than standard cleaning must be performed at authorised Catler service centre. To avoid the risk of electric shock, do not repair and/or make any adjustments to the appliance by yourselves. •...
-
Page 8: Know Your Ih 4010 Induction Hob
KNOW YOUR IH 4010 INDUCTION HOB 1. Air inflow openings 2. Ventilation openings 3. Ceramic hotplate 4. Cooking zone indicator 5. Control panel KNOW YOUR NEW IH 4010 INDUCTION HOB... - Page 9 8. BOOST button - this is used to enable the maximum power feature. 9. LOCK button - this is used to enable/disable the child lock feature. 10. ON/STANDBY button - this is used to turn the appliance on/switch to standby. KNOW YOUR NEW IH 4010 INDUCTION HOB...
-
Page 10: Operating Your Ih 4010 Induction Hob
OPERATING YOUR IH 4010 INDUCTION HOB BEFORE FIRST USE NOTE Before first use, remove all packaging We recommend that you always put and advertising labels / stickers from the the dishes on the hotplate centre first appliance. and then plug the power cord in the mains socket. - Page 11 ”H” NOTE The fan may be still running even is being shown on after the hotplate has switched in the the temperature standby mode. This is normal. display. There is a danger of a burns. OPERATING YOUR IH 4010 INDUCTION HOB...
- Page 12 “0:01”. Press the -/+ button on the power display side to set the required cooking time. You can set the cooking time from 0:01 to 9:00. Press and hold the-/+ button to speed up the time setting process OPERATING YOUR IH 4010 INDUCTION HOB...
- Page 13 The bottom diameter of the dishes should range between 15 to 20cm to be able to be used on the Catler IH 4010 induction hob. Before first use, you may notice tiny white spots on the bottom of the dishes. This is normal.
-
Page 14: Care And Cleaning
CARE AND CLEANING Before cleaning the appliance, always Wipe the hotplate with a soft sponge slightly disconnect the plug of the power cord from moistened in warm water. Then wipe with the mains socket and let it to cool down a dry cloth. properly. -
Page 15: Troubleshooting
TROUBLESHOOTING This chapter describes the most common problems you may encounter while using this appliance. If your problem is either not stated here or persists, stop using the appliance, unplug the power cord and contact your authorized service centre. UNDER NO CONDITION SHOULD YOU REPAIR OR DISASSEMBLE THE APPLIANCE YOURSELVES. - Page 16 You will then be able to use the hotplate again. Error code E1, E2, E4, E5, Eb or Stop using the hotplate. Unplug the power cord from the U1 appears on the display. mains socket and call your Catler authorized service centre. TROUBLESHOOTING...
- Page 17 INSTRUCTIONS AND INFORMATION ON DISPOSING OF USED PACKAGING MATERIALS Dispose of used packaging material at a site designated for waste in your municipality. DISPOSING OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT This symbol on products or original documents means that used electric or electronic products must not be added to ordinary municipal waste.
- Page 18 может немного отличаться от представленного на рисунках в данном руководстве. WWW.CATLER.EU CUSTOMER SERVICE • ZÁKAZNICKÝ SERVIS • ZÁKAZNICKÝ SERVIS • ÜGYFÉLSZOLGÁLAT • SERWIS KLIENTA • ОБСЛУЖИВАНИЕ КЛИЕНТОВ I N F O @ C A T L E R . E U...
Need help?
Do you have a question about the IH 4010 and is the answer not in the manual?
Questions and answers