Ltech M Series Quick Start Manual

M1+M4-5A
Wireless Dimming Control
warranty
5 years
The M series LED controller is compatible with 8 different kinds of remotes. The M4-5A receiver can
receive single color/CT dimming, RGB/RGBW control functions to meet a wide range of lighting
requirements. With the M series RF remotes, brightness, color as well as customizable color control
modes are easily achievable. Choose the remote that is right for your application.
1. Pa r a m e t e r :
Remote( D I M ) :
Model: M1
Working Voltage: DC3V(battery CR2032)
Working Frequency: 433.92MHz
CV R e c e i v e r ( D I M ) :
Model: M4-5A
Input Voltage: DC5V~DC24V
Max Current Load: 5A×4CH Max 20A
Max
Output Power: 100W/240W/480W(5V/12V/24V)
Gray Scale Level : Max 4096×4096×4096×4096
Working Temp.: -22ºF~131ºF
Weight(N.W.): 125g
RF WIRELESS
Remote Distance: 131 feet - 164 feet
Working Temp.:
-4ºF~131ºF
Weight(N.W.): 42g

2. Product Size:

175mm
30mm
170mm
Receiver

3. The Learning ID Method of Remote Control:

The Remote control has been matched to the receiver before leaving the factory. If deleted
accidentally, you can re-learn the ID as follows.
Learning ID:
With a short press of the ID learning button on the M4-5A receiver, the running light
will illuminate.Then press any key on the M1 remote control. The running light will
flash several times. The two should now be synced.
Cancel ID: Long press of the ID learning button on the M4-5A receiver for 5 seconds.
Attn: one receiver can be synced with 10 of the same or different kinds of remotes.
4. Operating Instruction for Receiver：
Running Light
ID Learning Button
DC5V~24V
Power Input Socket

5. Operating Instruction for Remote Control :

Sleep Mode:
The remote goes into standby mode after
30 seconds of non-use to save power.
Press any key to resume operation.
9mm
60mm
Remote- h o l d e r
Remote
OUT
LED Lamps
Connection Socket
Scene-mode I
Scene-mode
(Press 2S to save) (Press 2S to save)
Touch
Color Circle
Delay Off
Dimming
I I
On/Off