Download
Share
Print this page
Secufirst DID701 S Big Manual
  1. Manuals
  2. Brands
  3. Secufirst Manuals
  4. Accessories
  5. DID701 S
  6. Big manual

Secufirst DID701 S Big Manual

Wi-fi doorbell with wireless bell
Hide thumbs

Advertisement

Quick Links

Download this manual
DID701 S / B / BB
Wi-Fi doorbell with wireless bell
Big Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the DID701 S and is the answer not in the manual?

Questions and answers

Related Manuals for Secufirst DID701 S

Summary of Contents for Secufirst DID701 S

  • Page 1 DID701 S / B / BB Wi-Fi doorbell with wireless bell Big Manual...
  • Page 2 This big manual would help you through all the possible questions you might have during the use of the camera. Below is the overview of the topics within: 1. Product Overview P03~P08 2. How to Install P09~P17 3. Preparation Before Setup on Smart Device P18~P19 4.

  • Page 3: Product Overview

    Product Overview...
  • Page 4 Product Overview – Wi-Fi Doorbell Lens Wall mount holder Microphone Light Sensor Push Button Rubber cover For wiring Loud Speaker...
  • Page 5 Product Overview – Wi-Fi Doorbell Reset button (Hold for 10 seconds) Connection Wired Chime indoor (C1, C2 / 0V)It's only possible to connect a Mechanical Chime which is powered by an 8V AC transformer. The separate power supply is AC, so it doesn't matter which wire goes to C1 and C2.
  • Page 6 Product Overview – Wi-Fi Doorbell Adapter connection (V+, V- / 12V 1A) V+ = Red Wire V- = Black wire Note, pay attention to connect correctly!!! Connection for electrical lock (B1 + B2 / 0V).
  • Page 7 Product Overview – Wireless Bell Volume Settings Loud Speaker No function when bundle using with Wi- Fi Doorbell No function when bundle using with Wi- Fi Doorbell...
  • Page 8 Product Overview – APP The camera comes with free to download app called “SecuFirst HD Professional Edition” You could scan below QR code to download the app. Android Phone iOS Phone Scan Here Scan Here...

  • Page 9: How To Install

    How to install...
  • Page 10 How to install Remove the rubber cover on the backside of the Wi-Fi Doorbell. Connect the adapter with the extension cord. Use the screwdriver to punch a hole into the rubber cover. Insert the extension cord through the rubber cover. Connect the extension cord to the Wi-Fi Doorbell (V+ red wire, V- black wire).
  • Page 11 How to install...
  • Page 12 How to install...
  • Page 13 How to install...
  • Page 14 How to install...
  • Page 15 How to install...
  • Page 16 How to exchange SD Card Pre installed 16GB micro sd card. If you want to exchange to a bigger micro sd card, follow the below steps. Please remove the screws and rubber cover in the back of the metal housing first. Slide the camera upward to separate the camera with metal housing.
  • Page 17 If more angle needed on the other side, simply turn the bracket upside down and follow the installation instruction. Or go to YouTube and search “SecuFirst DID701” You could find more instruction videos for setup and installation.
  • Page 18 Preparation before Setup on Smart Device...

  • Page 19: Preparation Before Installation

    Preparation before installation To install this camera you need to prepare the following information: 1. Your own Wi-Fi name, and your own Wi-Fi password. • The camera must be registered on your own Wi-Fi network during this installation. • Please note, it is our help desk number 1 problem that customers enter their own Wi-Fi network password incorrectly during this installation.
  • Page 20 Camera Setup on Smart Device...
  • Page 21 Android Device Setup Open the app "SecuFirst HD Professional Edition" and tap "Press to add new system". The app will request you to turn on and off some connections, depending on the current settings of your phone. • Location: On (Only needed during the installation for better searching performance of the Wi-Fi networks).
  • Page 22 Connect the camera to your own Wi-Fi network. 1. The app will show you the Wi-Fi networks which the camera can see. Select your own Wi-Fi network (2.4Ghz) 2. Insert your own Wi-Fi password. Please note, it is our help desk number 1 problem that customers enter their own Wi-Fi network password incorrectly during this installation.
  • Page 23 Adjust the Security Password 1. Adjust the Security password. During this installation the default password of the camera is 123456. We don't think this is save enough and force to change this password during the installation. 2. The new password need to contain: A.
  • Page 24 Live View of Camera 1. The Doorbell will restart in 30 seconds. 2. The camera will try to connect with your own Wi-Fi network and password which you have filled in (9.1 and 9.2) The camera will show in green "Connected". Press Play to go to the live image of the camera.
  • Page 25 Live View of Camera In the Live view of the camera you see these options: A) Make a snapshot of the image you have on your phone. B) Audio unmute / mute for Wi-Fi Doorbell C) Record the live video manually D) Optional.
  • Page 26 Setting in the main menu Add a new device. Only needed when you buy another SecuFirst branded item like: IP camera, Door Entry, Alarm, Home automation and Lighting. Edit settings. When you tab on this button then 3 buttons will appear in the screenshot.
  • Page 27 Go to Advance Setting Tab "Edit Setting" Tab "Setting" above in the app. Tab "Advanced" Below in the app. The app will ask you to fill in the password which you made in step 10 of this Quick start guide, then press "OK".
  • Page 28 Playback Recording Tab "Edit Setting" Tab "Event" above in the app. A filter will show which looks default 1 hour back on the micro SD card. If you want to look back further, kindly enlarge the filter by for example adjust the start date. Tab "OK".
  • Page 29 Add a 2 Phone or Tablet If the Doorbell is installed on the 1st phone or tablet, you can easily add the camera on a 2nd phone or tablet. The Doorbell is already installed, so you don't have to do this again.
  • Page 30 Add a 2 Phone or Tablet 1. Download the SecuFirst HD Professional Edition app on the 2nd phone or tablet. 2. Tap “Press to add new system”. 3. When asked by the app, turn on location and turn off your mobile data.
  • Page 31 • DID Code • Every SecuFirst camera has its own unique DID code. You can find your DID Code in 2 places. 1. The QR code sticker on the camera itself 2. In the app of the 1 phone or tablet which has been used to install the camera.

  • Page 32: Notification Setting

    Notification Setting When you have more than one phone or tablet setup with the Wi- Fi Doorbell, you could change the notification setting to allow notification or stop it when needed.
  • Page 33 Notification Setting Open the SecuFirst HD app Tab below on Edit Settings Tab above on Settings Tab on the button Advanced Settings Enter the admin password (During the installation of the camera you needed to change the default password) Tab auto login on if you want to save the password to this phone.
  • Page 34 Notification Setting If the camera see motion, it will start to record and send a push message to your mobile phone(S) or tablet(s). This function only applies to motion detection. It doesn’t have effect on the calling page when a visitor will press the Wi-Fi door phone. Turn the switch to your preferred setting. ON = When the camera see movement, it will start to record and send a push message.
  • Page 35 • At here you could choose to turn OFF all notification or specific notification of SecuFirst APP. • The change made here will only apply to this specific phone or tablet. All other devices setup will not be changed.
  • Page 36 Advanced settings of the Doorbell With every SecuFirst camera you can login into the advanced settings of the Doorbell. All changes in the advanced settings will apply to all smartphones or tablets which are connected to the Doorbell. The advanced settings are only available when the Doorbell...
  • Page 37 Advanced settings of the camera – How to go to Advance settings Open the SecuFirst HD app Tab below on Edit Settings Tab above on Settings Tab on the button Advanced Settings Enter the admin password (During the installation of the camera you needed to change the default password) Tab auto login on if you want to save the password to this phone.
  • Page 38 Advanced settings of the camera – How to go to Advance settings When enter the advanced settings, it will be required to enter the admin password. It’s possible to tab the box Auto login. When auto login is selected, the app will not request to enter the password again.
  • Page 39 Advanced settings – Base Settings There will appear a menu with blue bars . When Tab a blue bar to get more options. We start with the first blue bar, Base Settings.
  • Page 40 Base Settings – Admin Password During the installation of the camera, you were requested to change the default Security and admin passwords (123456) to a password of your choice. During the installation you have changed both passwords (Same password for Security as for Admin) The Admin password gives access to the advanced settings.
  • Page 41 Base Settings – Cancel Auto Login When enter the advanced settings, it will be required to enter the admin password. It’s possible to tab the box Auto login. When auto login is selected, the app will not request to enter the password again. It will be saved in the app.
  • Page 42 Base Settings – Device Security Code The default Security passwords is 123456. During the installation you have changed both passwords (Same password for Security as for Admin). The Security password, together with your unique DID code, gives access to the camera. In this option in the advanced settings, it’s possible to change the Device Security password to your own choice.
  • Page 43 Base Settings – Notify setting If the camera see motion, it will start to record and send a push message to your mobile phone(S) or tablet(s). This function only applies to motion detection. It doesn’t have effect on the calling page when a visitor will press the Wi-Fi door phone.
  • Page 44 Base Settings –Sensor Setup A wireless chime is connected to the Wi-Fi doorbell. This sensor is using the 868Mhz protocol (our own protocol, not linkable with other 868Mhz products from other brands). Tap on sensor settings, then on the already paired wireless chime.
  • Page 45 Base Settings –Sensor Setup It’s possible to expand the wireless chimes to the Wi-Fi doorbell. Additional chimes can be ordered on our website www.secufirst.eu Please note, a maximum of 2 wireless chimes can be connected to the Wi-Fi doorbell.
  • Page 46 Base Settings –Sensor Setup Tab on “+” Select “Door Chime” Insert the batteries within 30 seconds...
  • Page 47 Base Settings –Sensor Setup Tab the chime to select a melody and change name. Leave the setting...
  • Page 48 Base Settings – Time Zone Set the correct time zone for the camera. The time zone in Nord Europe is GMT +1. Please note, on the top of the app is the option Summer time with a switch on/off. Turn on daylight saving time when it is summertime. The time zone setting is necessary to put the correct timestamp in the recorded videos.
  • Page 49 Base Settings – Wi-Fi Connect the camera to another Wi-Fi network if desired. This only works if the Wi-Fi network which have been installed on the camera is also available. This function is intended to transfer the camera, for example, from your Wi-Fi router to another booster or repeater in the house.
  • Page 50 Base Settings– Time Stamp A timestamp is burned into every recorded video. This way you know on which date and time a certain recording took place. Please note, the timestamp works together with the time zone settings, 2 headings above. Make sure the time zone and daylight saving time switch are set correctly.

  • Page 51: Email Settings

    Email Settings In addition to receive a push notification from our app, when there is motion detection, you can also receive an email with this option. This option is only available with a Gmail email account. The email contains only text when there has been movement.
  • Page 52 Video Setting – Video Quality HD Video The video quality can be set for the live view in the app. This function is intended for cameras that receive poor Wi-Fi reception from the router or the internet subscription speed. If the camera shows slow images that are not smooth, you can lower the video quality. Better Streaming: The camera needs an upload speed from your router of at least 3 Mbit HD Video: The camera needs an upload speed from your router of at least 8 Mbit Please note, the video quality is only for the live view in your app.
  • Page 53 Video Setting - Environment Mode SecuFirst has various cameras for indoor or outdoor use. By default, an outdoor camera is already set to outdoor. It is of course possible to place an outdoor camera inside. Then set the environment mode to within the house. This option lets the camera lens handle the colors in the image differently.
  • Page 54 Video Setting – Low Light Enhancement This option is for the southern countries which are close to the equator. If the low sun shines directly into the lens, a white haze may appear in the live image (similar to brightness of an TV). If the white haze is visible, it can be removed by setting the low light settings to level 5.
  • Page 55 Sensitivity Setting – Detect Mode The camera can record motion detection. Detect mode on (Software) means: The camera will record to the Micro SD card when there is motion. You are also able to adjust the sensitivity of the detection for day and night time.
  • Page 56 Sensitivity Setting – Motion Mask In addition to sensitivity, it is also possible to make parts of the image insensitive to motion detection. We call this “Motion mask”. This option will be visible in the advanced settings when the detect mode is turned on.
  • Page 57 Melody Settings Doorphone This setting is for changing the melody of the outdoor unit of the Wi-Fi doorbell itself. • Melody Frontdoor On / Off. By default, Wi-Fi doorbell will let you hear a melody out of the speaker, when someone presses the Wi-Fi doorbell.
  • Page 58 Melody Settings Indoor Chime This setting is for changing the melody of the indoor unit (wireless indoor chime). • Change Melody Chime A wireless chime is connected to the Wi-Fi doorbell. This sensor is using the 868Mhz protocol (our own protocol, not linkable with other 868Mhz products from other brands).
  • Page 59 Melody Settings Indoor Chime You can change the volume of the wireless indoor chime on the chime itself by pressing the speaker button. The volume will change from high to low. The other two buttons on the chime do not work in combination with the Wi-Fi doorbell.
  • Page 60 Doorchime Setting Use this function if you have installed a wired chime in addition to our adapter. (4 wires connected to the Wi-Fi doorbell). • Extension Doorbell Set the time for how long your own wired chime should ring. Compare it with the old situation, when there was only a door press button at the front door.
  • Page 61 For example (The melody can be different): 1 second: Tringggg 3 seconds: Tringggggggggggggggggggggggg 5 seconds: Tringggggggggggggggggggggggggggggggggggggggggg Which wired chime can work together with the SecuFirst DID701 Wi-Fi Doorbell: The wired chime needs its own transformer. The chime itself must be Mechanical. This means that a clapper actually has to hit a bell to make a sound.
  • Page 62 Unlock Duration Use this function if you have connected an electric lock to the Wi-Fi doorbell. • Lock 1 An electric lock or fence can be connected to the Wi-Fi doorbell. The wires of the lock must be connected to contacts B1 and B2 of the Wi-Fi doorbell.
  • Page 63 SD Card Setting – SD Card Format The micro SD card that is placed in the camera must be format at least 1x before it can start to record. The camera will format the micro SD card to FAT32 extension. The micro SD card must meet a number of requirements: •...
  • Page 64 Record Motion Detection – SD Card Format...
  • Page 65 SD Card Setting – Overwrite SD Card A micro SD card can become full of recordings. To avoid to remove the recordings on the micro SD card every time, this overwrite function is inside the app. Set this feature to ON. This means that if the micro SD card is full of recordings, the next recording will overwrite the oldest recording.
  • Page 66 SD Card Setting – Record Without Audio In some countries it is illegal to record audio with the video material. ON: Record video without audio OFF: Record video with audio.

  • Page 67: About Device

    About Device In this option you can find information about your product. • Current Firmware Version • Model / type number • Size of the micro SD card in the camera and then how much is still free available on the micro SD card.
  • Page 68 Under device information there can appear a 2nd white bar with Firmware update. This white bar is only visible if SecuFirst has released a new firmware for your product. New firmware is only available if a micro SD card has been installed in the product.
  • Page 69 Connect wired internet. On every SecuFirst camera you have the option to connect it to your wireless Wi-Fi network or via a wired internet cable.
  • Page 70 No password is required. If you get a new modem router from the (new) provider, the camera will work again immediately. • A SecuFirst camera is not the same as a computer. The camera will only work on wired internet if you follow the order below. •...
  • Page 71 How to install...
  • Page 72 How to install...
  • Page 73 Let the camera start up, wait about 1 minute. Connect your phone or tablet to the same (Wi-Fi) network that you have wired the camera to. Open the SecuFirst app. Press “Add system” (+) Choose the installation option: “Installation with wired internet”.
  • Page 74 Connect wired internet – Important Notice During installation, the default security password of the camera is 123456. We do not think this is secure enough and require you to change this password. The password must meet: A) Minimum 12 characters. B) At least one capital letter (Example: A) C) At least one lowercase letter (Example: a) D) At least one digit (Example: 1).
  • Page 75 Record Motion Detection...
  • Page 76 Record Motion Detection Micro SD card requirements: You can record videos only to a micro SD card. This micro SD card must comply with: • Class 10 • UHS1 • Maximum 128GB We prefer to use an A brand micro SD card (higher quality) UHS 1 Class 10 UHS 3...
  • Page 77 How to exchange SD Card Pre installed 16GB micro sd card. If you want to exchange to a bigger micro sd card, follow the below steps. Please remove the screws and rubber cover in the back of the metal housing first. Slide the camera upward to separate the camera with metal housing.
  • Page 78 Record Motion Detection – SD Card Format...
  • Page 79 Record Motion Detection – SD Card Format...
  • Page 80 Record Motion Detection – Turn ON Motion Detection Recording Go to the advanced settings of the camera via the app Select the blue bar “Sensitivity” and then “Detect mode”. Here you can switch the motion recordings on (Software) or off. Detect mode on (Software) means: The camera will record to the micro SD card when there is movement.
  • Page 81 Record Motion Detection – Motion Masking Follow the red arrow to setup motion masking...
  • Page 82 Record Motion Detection – Motion Masking Follow the red arrow to setup motion masking...

  • Page 83: Playback Recordings

    Playback Recordings...
  • Page 84 The only requirement is that your phone has internet. It does not matter whether this is your own Wi-Fi network, mobile data (3G, 4G or 5G) or Wi-Fi from a hotel. Open the SecuFirst HD app Tap edit settings at the bottom of the app...
  • Page 85 Playback Recordings Select a start date, press “OK”...
  • Page 86 Playback Recordings There are two ways to playback the recordings: Stream the video: Tab the date / time of the video. The video will stream from the micro SD card to your phone. After watching the video, nothing will stay behind on your phone's hard drive. Download the video: Tab the download button of the relevant video.
  • Page 87 Playback Recordings The video can also be found manually on your phone: For Android: Go to “My files” Tap “Internal storage” Tap on the folder “Record” Tap on the folder “your DID code of the camera” All downloaded videos are stored here. For Apple (iOS): Apple limits the storage of your phone or tablet.
  • Page 88 Playback Recordings – File Sharing Stream the video Download the video Share the video Share to email Or Whats App...
  • Page 89 Connect a wireless chime...
  • Page 90 Base Settings –Sensor Setup It’s possible to expand the wireless chimes to the Wi-Fi doorbell. Additional chimes can be ordered on our website www.secufirst.eu Please note, a maximum of 2 wireless chimes can be connected to the Wi-Fi doorbell.
  • Page 91 Connect a wireless chime Tab "Edit Setting" Tab "Setting" above in the app. Tab "Advanced" Below in the app. The app will ask you to fill in the password then press "OK". If you select "Auto Login" then next time you login, there is no need to re-enter the password. Tab "OK".
  • Page 92 Connect a wireless chime Tab on “+” Select “Door Chime” Insert the batteries within 30 seconds...
  • Page 93 Connect a wireless chime Tab the chime to select a melody and change name. Leave the setting...
  • Page 94 - Thank you for choosing SecuFirst. For more information, please visit our website www.secufirst.eu - Helpdesk SecuFirst: E-mail: info@secufirst.eu Telephone: 0031 (0)85 00 80 888...

This manual is also suitable for:

Did701 bDid701 bb8719325304220