1. Manuals
  2. Brands
  3. Pegasus Manuals
  4. IP Access Controllers
  5. PP-3702/T Series
  6. Operational manual

Pegasus PP-3702/T Series Operational Manual

Intelligent time attendance recorder & access controller
Hide thumbs
Table of Contents

Advertisement

Quick Links

Intelligent Time Attendance Recorder & Access Controller
Access Control/Time & Attendance / Lift Access Control System/ Security
PP-3702/T Series
Operational Manual
Ver.11.1
W-04-PP3702T/E

Advertisement

Table of Contents
loading

Related Manuals for Pegasus PP-3702/T Series

Summary of Contents for Pegasus PP-3702/T Series

  • Page 1 Intelligent Time Attendance Recorder & Access Controller Access Control/Time & Attendance / Lift Access Control System/ Security PP-3702/T Series Operational Manual Ver.11.1 W-04-PP3702T/E...

  • Page 2: Table Of Contents

    Table of contents System introduction General features Specification LCD instruction Panel description Bottom view Wiring connectors and PIN assignment How to connect PP-3702T to a computer? Example of wiring example Controller and relay box wiring Brief system programming Change the master PIN Function code instruction F0: Delete all personal map F1:Access by key in user ID through master PIN...
  • Page 3 F5 : Inquiry mode A. Single card inquiry B. Inquiry with learning mode C. Inquiry card status by block mode F6:Add personal map A. Add card no. B. Add card no. and PIN C. Add card with learning mode D. Add card with block mode F7: Delete personal map A.
  • Page 4 Packing list Before getting start, please check the PP-3702/T package contains the following items: DESCRIPTION Q’TY The system unit 1 unit 9 Pin connector (Blue) 1 pc 8 Pin connector (White) 1 pc 5 Pin connector (White) 1 pc 4 Pin connector (White) 2 pc Screw 1 pc...

  • Page 5: System Introduction

    System introduction PP-3702/T is an intelligent time recording terminal designed to meet the variant applications in time attendance and access control, lift control & ARM/DISARM security requirements.Each terminal can be operated independently or through PC/Internet adapter PC-T100 to fulfill the multiple terminal system.
  • Page 6 1-B. Access control features: (Main application) System parameters and personal access map can be down loaded by PC or manually programmed through keypad. The personal access map is consisted of card ID, staff number and staff name, PIN and Time Zone Status, expiry date and Anti-passback.Operation modes : (1) card only (2) card + PIN (3)Door PIN only and duress feature (4)Card no +PIN and duress feature(5)Free access (6) Automatic operation mode by time zones...

  • Page 7: Specification

    Specification Dimensions ：174mm(L) x 100mm(W) x 43mm(H) Weight ：600g± 5% ：DC 12V±10%, 80mA~100mA(not include power Power supply requirement for lock & alarm) ：Default 9,600 bps N,8,1(2,400bps/4,800bps) Transmission rate (19,200bps/38,400bps<selectable>) Operating temperature ：0 ℃ ℃ ~ 70 Operating humidity ：10%~90% ：For system programming, pass word entry or duty code Keypad selection.

  • Page 8: Lcd Instruction

    LCD instruction Normal Display: After plug-in power, LCD displays as below: Y Y / M M / D D h h：m m XXX. +NNNNN The calendar year, month and date Y Y/ M M / D D: (Year/ Month/ Day) System clock, Hour &...
  • Page 9 DPT : LCD message display time by F4=250t, useful for F＊ T-A :Time zone control – Free access mode Y - Enable function N -Disable function *Note: The system could be operated in proper order only when the address code is correctly programmed through 88nn. If the reader address is not correctly programmed, the display of address will show some other ASCII characters as “xxx“...

  • Page 10: Panel Description

    Panel description Bottom view J1-8 pins connector for Communication and alarm output J2-9 pins connector for Access port KJ10- 4 pins connector for external reader KJ11-4 pins connector for external reader(Optional) KJ4-5 pins connector for bell outport KLJ1-RJ-45(For TCP/IP)

  • Page 11: Wiring Connectors And Pin Assignment

    Wiring connectors and PIN assignment A. J2-9P Blue (For power input and access functions) ＊Note: Please connect the blue wire to GND if the Door Monitoring function is unnecessary. Please connect the purple wire to GND if the Security Sensor function is unnecessary.
  • Page 12 E.KLJ1-RJ-45(For TCP/IP) PIN Number Signal TPTX+ TPTX- TPRX+ TPRX-...
  • Page 13 Note: Via RJ45 cable to a computer directly Please change one of the RJ45 connector (crossing).

  • Page 14: How To Connect Pp-3702T To A Computer

    How to connect PP-3702T to a computer? Change IP address(IE only) & change Ports setting a. Change IP address(IE only) 1. Start IE (Internet Explorer), keyin IP address: 192.168.1.120 on internet to start the setting. 2. Select DHCP Mode to Static IP, and key-in IP address. 3.
  • Page 15 b. Change serial ports 1. Please set Serial Port1. 1) Baud Rate: 9,600 2) Data Size: 8 3) Interface: RS232 4) Local Telnet Port Number: 4001 (*Note: Our software uses socket port “4001”) 5) Click “ Update” for complete setting.
  • Page 16 2. Please set Serial Port2. 1) Baud Rate: 9,600 2) Data Size: 8 3) Local Telnet Port Number: 4001 (Note: Our software uses socket port “4001”) 4) Click “ Update” for complete change.

  • Page 17: Example Of Wiring

    Example of how to wiring...
  • Page 18 ※R-27-YK10T1/125/250V is line filter to avoid signal interference. ※ If elevator cont roller doesn’t work; please turn off “Bypass switch” of non-controlled button. ※ To connect 2 or 3 of 24 floor controllers to achevie 64 floors access of set up. ※Please refere appendix for floor controller of relate operation manner.

  • Page 19: Controller And Relay Box Wiring Example

    Controller and relay box wiring example PP-3702/T PG-OUTMOD-8 Relay Box 9 Pin Blue Connector J5-7 Pin Blue Connector Color Signal Name Color Signal Name No1.Red +12V No1.Red +12V No2.Black No2.Black No3.Brown No3.Orange No Connection No4.Orange No4.Purple Serial Printer Input No5.Yellow No5.Black No Connection No6.Green...
  • Page 20 System initialize (default password 246890) The system initialization means the system parameters are defaulted by F4=0850(off-line mode) or F4=0750(on-line mode). Then the user could modify some parameters based on it. After each modification to individual requirement, the user may backup them by code F4=0650. Once the parameters are destroyed, the code F4=0950 could be applied to restore it.

  • Page 21: Brief System Programming

    Brief system programming Change the master PIN Ex.Change the master PIN to 654321，than F4+4609+654321. The new master PIN would be changed to 654321 Step Description ＊PROGRAM＊--＞ Press[0] + master PIN [246890] Enter into programming mode ＊FUNC-->-------- Press[4] Parameter mode (F4) KKKKKK would be the Press[4609] +new master MST.PIN- KKKKKK >...

  • Page 22: F3:Calendar Year, Month And Date Setting

    F2: Weekday, hour, minute setting Step Description ＊PROGRAM＊--> Enter into Press[0] + master PIN [246890] programming mode ＊TIME--＞-------- Time mode (F2) Press[2] Press[201536] Tuesday, 15:36 pm ＊ＴＩＭＥ--＞ ２ ０ １５ ３６ Minute (0~59) Weekday code(0~6) Hour (0~23) Don’t cared digit(0~9) 0 : Sunday 4 : Thursday 1 : Monday...
  • Page 23 F5: Inquiry mode A. Single card inquiry Step ＊ ＊--> Press[0] + master PIN [246890] PROGRAM ＊CARD -------- Press[5] Press card NO.[1 2 3 4 5 6 7 8] 12345678=10=9999 ＊ZONE－－0 1 0 0 . 0 0 0 1 ＝nn＝k k k k Repeat the last stepstep or press [#] to escape ＊ZONE－－...
  • Page 24 X X E Starting card no. Last 4 digits of ending card number Time zone status (F4=1601) 00: Illegal 10: Clear all time zones 19: Authorize all time zones 1n: Authorize individual time zone (1~8) F6: Add personal map A. Add card no. with group number：(Under F4=3200) Step Description ＊PROGRAM＊-->...
  • Page 25 C. Add card with learning mode: ( F4 = 6333) Step Description ＊ ＊--> Press[0] + master PIN [246890] PROGRAM Enter into programming mode *FUNC Press[4] Add mode(F4) Press[6333] *ADD CR>-LEARN-> Learning mode Present card *ADD CR>-LEARN-> Repeat the last step or press [#] to escape from the programming.
  • Page 26 B. Delete card with leaning mode (F4=7333) Step Description ＊PROGRAM＊--> Press[0] + master PIN [246890] Enter into programming mode ＊FUNC Press[4] Parameter mode(F4) Press[7333] * DELETE >-LEARN-> learning mode Present card * DELETE >-LEARN-> Reading cards CCCCCCCC to delete cards Repeat the last step or press [#] to escape from the programming.
  • Page 27 F8: Time zone/holiday/bell programming A. Personalized mode (F4=1601, time zone 01~08) B. Free access mode (F4=3801, time zone 11~18) C. Holiday mode (F4=1801) D. Bell alarm mode (F4=2801) A. Access time zone setting Ex. define a time zone from 20:01 till 06:59 next day for Monday, Tuesday &...
  • Page 28 =0 : not general authorized, d2 ~ d8 should be entered one by one d2 ~ d8—individual weekday enable/disable = 1: legal = 0: denied d9—Auto mode by time zone = 1: with key = 0: keypad less A-1 Time Zone Mode/Add Card Mode 62nn Setting time zone for group (nn=01~99) (Under F=1601) Note: Please delete all group data for first time setting group.
  • Page 29 A-3. Personalized time zone inquiry (time zone=01~08) Step Description ＊PROGRAM＊--> Press[0] + master PIN [246890] Enter into programming mode ＊ZONE--＞-------- Press [8] Time zone mode(F8) ZONE--＞-------- Press [5 0 2 0 0 0 0 0 0 0 0] 02=0900=1000=GA1 ＊ＺＯＮＥ--＞5 0 n xxxxxxxx 5: Inquiry time zone content Time zone no.
  • Page 30 Zone: defined as the following: h h m m h h m m time zone Ending time starting time 6:Add time zone (11~18) B-1. Auto duty mode (Time zone=11~18)(F4=3802) Step Description ＊PROGRAM＊--> Press[0] + master PIN [246890] Enter into programming mode ＊ZONE--＞-------- Press [8] Time zone mode(F8)
  • Page 31 = 1: legal = 0: denied d9—Auto duty mode by time zone = 1: enable(1~7), expect 4 = 0: disable Duty Meaning Duty Meaning code display code Display 1－ WORK On duty 2－ OFF 6－ BACK Off duty Return job 3－...
  • Page 32 G-DAY: Defined as the following: d2 d3 d4 Mnemonic g w6 w5 w4 Meaning gen. Fri Thu Duty code d1— general weekdays enable/disable =1: general authorized, d2 ~ d8 are ignored =0 : not general authorized, d2 ~ d8 should be entered one by one d2 ~ d8—...
  • Page 33 C-1. Holiday inquiry Step Description ＊PROGRAM＊--> Press[0] + master PIN [246890] Enter into programming mode ＊ZONE--＞-------- Press [8] Time zone mode(F8) The second holiday 11= 1 0 2 5 = XXXX = HOL Press [302 1002 1234] of October, date of 10/25 Repeat the last step or press [#] to escape from the programming.
  • Page 34 D-1. Bell alarm inquiry mode (F4=2801) Step Description ＊PROGRAM＊--> Press[0] + master PIN [246890] Enter into programming mode ＊ZONE--＞-------- Press [8] Time zone mode(F8) 401=0750=0750=ALM Please refer to the following Press [40107010000] statement Repeat the last step or press [#] to escape from the programming. Meaning: 7:50 is the1 alarm time at 7 o’clock 070n...
  • Page 35 Ｆ＊：Inquiry and display the stored events Ex.: Modify the read/write counter to 00150 Step ＊PROGRAM＊--> Press[0] + master PIN [246890] ＊DSPLAY=-------- Press[＊] *DSPLAY= ｄｄ ＨＨ：ＭＭ Press [50000150 ] CCCCCCCC S [ NNNNNN ] dd : Date HH : MM Hour & Minute cccccccc : 8 digits ID number S :Access status E: Error message...

  • Page 36: Group 1.Input Commands

    0019 Delete all bell alarm data 0072 Delete all group data Save all the modified function codes as 0650 template(could be recalled by 0950) Initialize the system in real time on-line state. (The 0750 system will be initialized as: 2101, 2203, 2306, 2501, 1500, 1600, 1100, 3200, 8600, 8700, 1700, 8902, 1900……...

  • Page 37: Group 2.Output Commands

    Group 2. OUTPUT tt: Door release time from 01 to 98 in unit of 1 seconds. 21tt 2199: Output becomes normality, both on or off to switch. Alarm time . tt= 00 to 99 in unit of 1 seconds. 22tt 23tt Door monitoring time.tt=00 to 99 in unit of 1 seconds.
  • Page 38 Note: +1 or -1 of independent pass code, the door will be unlocked and trigger to Alarm system. Ex.If the door pin is set up as 1234, the duress code will be 1233 or 1235. Delete the project number by direct reading card * 3700 Record the project number by direct reading * 370n...
  • Page 39 Group 7. CARD DELETING 72nn Delete time zone from group nn(nn=01~99) 7333 Delete single card with auto learning mode 7700 Delete card with block mode Group 8. SYSTEM CONFIGURATIONS 8300/830t Not check repeat reading/ Present repeat reading within t minutes. 840X 8400 Non-store the error even 8401 Store the error event...

  • Page 40: Group 9. Factory Configuration

    Group 9. FACTORY CONFIGURATION nn=00~31the modification factor as the RTC 92nn is fast nn=32~63 the modification factor as the RTC is slow Example: as the crystal is faster than 2Hz, then the factor is 21(F4=9221) ＊9600/9601 Disable/ enable name display. Select the card digits as group index for comparing.
  • Page 41 Simple and easily trouble shooting Questions concerning the card reader #Symptom 01: The reader can not read card and get access A.1—To check whether the proximity card is encoded correctly. Either correct project number or card type. . A.2—To check whether the proximity card is legal. A.3—To check if the personal ID is enrolled in the reader by function F6 of card adding.
  • Page 42 mode and the door monitoring sensor doesn’t normal closed as the door is held. In such condition, the door release driver will shut off the relay driver once it found the door is opened because the door sensor is left opened. Therefore, please replace the sensor or set the door monitoring mode as 1100 (not monitoring) before you replace the sensor.
  • Page 43 correct and solid reliable by viewing the terminal response from each reader. A.2—If the supported PC standard software package for polling mode and through the multi-channel controller PCP-832-xx can set the system time and date, but cannot collect the stored or immediate data, then please check if the Data Terminal Ready (PIN G) is correctly connected with PIN 4 (Non-inverted Data Terminal Ready).
  • Page 44 Appendix...

Table of Contents