Advertisement
Congratulations on your new
InAlto Outdoor Beverage Centre!
IN STA LL ATI ON
• Two person installation: Use two or more
able-bodied people to move and install the
beverage centre. Failure to do so can result
in back or other injury.
• Before connecting the beverage centre to
the power source, let it stand upright for
approximately 8 hours. This will allow
any refrigerant gasses that may have been
disturbed during the transportation process
to settle and reduce the possibility of a
malfunction in the cooling system from
handling during transport.
• For a complete guide, refer to user manual,
page 9–10.
P O S IT I ON IN G TH E S H ELVE S
Position the shelf supports inside the racks on
the sides at your required level. You can then
place the shelves firmly on the supports and
begin to load your contents.
D E TAI L S
Size (mm):
850H x 560W x 496D (+41 handle)
M O D E L
/
I B F 1 1 8
Q U I C K S T A R T G U I D E
TH E CON TRO L S
Your Beverage Centre Controls
1
Temperature Control: Up Button
2
Temperature Control: Down Button
Press the Up or Down buttons to increase
or decrease the temperature inside the
beverage chiller cabinet in 1° intervals
3
LED Display
4
Indicator Lights
Indicator on the left relates to the Cooling
Symbol ( ); Indicator on the right relates to
the Defrost Symbol ( )
5
Set Temperature Button
Press this button to set the temperature
6
Defrost Button
Press to manually activate the defrost cycle
7
Light Function
Press the Up button to turn the light
on and off
SUPP O RT
Telephone: 1300 11 4357
Email: support@residentiagroup.com.au
W W W . I N A L T O . H O U S E
Advertisement
