Page 2
8.0 Equipment Disposal..........6 CORNING LS E N UTATI NG MIX ER...
Page 3
2.0 Installation The Corning LSE Nutating Mixer can be used on a bench, in a cold room, or in an incubator up to 40°C. Place the unit on a flat stable surface and be sure to leave sufficient room around the unit to allow the platform to run freely.
Page 4
This symbol identifies a Protective Earth (PE) terminal, which is provided for connection of the supply system’s protective earth (green or green/yellow) conductor. CORNING LS E N UTATI NG MIX ER...
Page 5
DISCLAIMS ALL OTHER WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. Corning’s sole obligation shall be to repair or replace, at its option, any product or part thereof that proves defective in material or workmanship within the warranty period, provided the purchaser notifies Corning of any such defect.
Page 6
According to Directive 2012/19/EU of the European Parliament and Council of 4 July 2012 on waste electrical and electronic equipment (WEEE), the Corning® LSE™ Nutating Mixer is marked with the crossed-out wheeled bin and must not be disposed of with domestic waste.
Page 7
L A T I N A M E R I C A t 886 2-2716-0338 grupoLA@corning.com f 886 2-2516-7500 Brazil t 55 (11) 3089-7400 Mexico t (52-81) 8158-8400 For a listing of trademarks, visit www.corning.com/clstrademarks. All other trademarks are the property of their respective owners.
Need help?
Do you have a question about the LSE and is the answer not in the manual?
Questions and answers