feedback 45134 Operating Instructions Manual

Please carefully read and save these instructions before attempting to assemble, maintain, install, or operate this
product. Observe all safety information to protect yourself and others. Failure to observe the instructions may
result in property damage and/or personal injury. Please keep instructions for future reference.
Important Operating Instructions
7 VARIABLE SPEED POLISHER
CALIFORNIA PROPOSITION 65
WARNING: You can create dust
when you cut, sand, drill or grind
materials such as wood, paint,
metal, concrete, cement, or other
masonry. This dust often contains
chemicals known to cause cancer,
birth defects, or other reproductive
harm. Wear protective gear.
WARNING: This product or its
power cord may contain
chemicals, including lead, known
to the State of California to cause
cancer and birth defects or other
reproductive harm. Wash hands
after handling.
Important!
When using equipment, a few safety
precautions must be observed to
avoid injuries and damage. Please
read the complete operating manual
with due care. Keep this manual in a
safe place, so that the information is
available at all times. If you give the
equipment to any other person, give
them these operating instructions as
well. We accept no liability for
damage or accidents which arise due
to non-observance of these
instructions and the safety information
herein.
For warranty purchases, please keep your dated proof of purchase. File or attach to the manual for safe keeping.
For Customer Service, please call 1-800-348-5004 or
email feedback@natitools.com
SPECIFICATIONS
Motor: 120V ~ 60Hz, 9.2 Amp
No-Load Speed: 200 - 3,350 RPM
Buffing Diameter: 7
Keep this manual and receipt in
a safe and dry place for future
reference.
GENERAL SAFETY RULES
WORK AREA
KEEP THE WORK AREA CLEAN
AND WELL LIT. Cluttered benches
and dark areas increases the risk
of injury.
DO NOT OPERATE THE TOOL
IN EXPLOSIVE ATMOSPHERES,
such as in the presence of
1
Models: 45134
flammable liquids, gases, or dust.
The tool may create a spark that
could ignite flammable liquids,
gases, or dust.
KEEP VISITORS AWAY. Do not
let visitors handle the tool. All
visitors should be kept safely
away from the work area.
NEVER ENGAGE IN
HORSEPLAY WITH THE TOOL.
Respect the tool as a working
implement.
PERSONAL SAFETY
OPERATORS AND OTHERS IN
WORK AREA MUST WEAR
SAFETY GLASSES WITH SIDE
SHIELDS. Safety glasses must
conform to ANSI Z87.1
specifications.
45134 03/2017