Related Manuals for TaiShan TQ1006B
Summary of Contents for TaiShan TQ1006B
- Page 1 Shandong Taishan Sports Equipment Co.,Ltd Installation Of Competition ring TQ1006B Web : www.taishansports.cn...
- Page 2 Shandong Taishan Sports Equipment Co.,Ltd Special statement: This product is manufactured in accordance with the requirements of the International Gymnastics Federation (FIG), but the equipment that meets the standards of the International Gymnastics Federation (FIG) does not mean that any risk is eliminated. The user is not trained or under the supervision of the coach Injuries caused by the use of equipment shall be borne by the user.
- Page 3 Shandong Taishan Sports Equipment Co.,Ltd 10) Before the equipment is used, it should be Warm up sufficiently to prevent injury. If you feel obvious pain or discomfort during use, please do not continue to use it to avoid further injury;...
- Page 4 Shandong Taishan Sports Equipment Co.,Ltd Instruction： This competition ring can be used in competition and training. The ring is made of composite wood material, which has strong moisture absorption; the beam parts are welded by high-quality square pipes, and a special rubber spring device is built in, and the damping effect is significantly enhanced;...
- Page 5 Shandong Taishan Sports Equipment Co.,Ltd Web : www.taishansports.cn...
-
Page 6: Installation
Shandong Taishan Sports Equipment Co.,Ltd Installation: Packing list: C Ring ring assembly A Beam assembly B Upper support welding 2pcs 1pcs 2pcs F Rope part D Middle support welding E Lower support part 4pcs 2pcs 2pcs Installation steps: 1) Place the column on a level and firm ground for easy installation;... - Page 7 Shandong Taishan Sports Equipment Co.,Ltd 3) Fasten the 4-D shackles on the four F-rope parts with the 3-rope ears on the A-beam assembly, and then assemble the A-beam and B-beam in the order from top to bottom. Upper support welding, D- middle support welding, E- lower support component assembly;...
- Page 8 Shandong Taishan Sports Equipment Co.,Ltd 3) Connect the chain at the other end of the rope part to the ground anchor with a 5-D shackle to make the rope part as close as possible to a straight state. Pull rope tension adjustment: Turn the 6-screw buckle in the direction as shown in the figure below to adjust the tension (reverse rotation to loosen).
- Page 9 Shandong Taishan Sports Equipment Co.,Ltd Instructions for use: This product is specially designed for ring competition and training. Adjustment instructions: As shown in the figure below, pull the 7-gear component to adjust, and then lift the adjusting tube component to achieve the purpose of adjusting the height, while fixing the rope component on the ground.
- Page 10 Shandong Taishan Sports Equipment Co.,Ltd Warrant： 1) The warranty period from the date of delivery of the equipment is shown in the following table: Name Warranty Time Remarks Ring 3 years Without lifting ring Lifting ring 1 year or used 100,000 times 2) Due to improper use, maintenance is not performed as required.