Switch cam
• Remove the Switch cam Spring for switch cam and Spring
for breaker.
P.C.B. (LED)
• A clow is opened and the P.C.B. (LED) is removed.
• Disconnect the connector from the P.C.B. (LED).
6.10. Motor comp.
1. Open the clows of the Unit cover from the boss of the
Motor comp..
Breaker
• A clow is opened and the Breaker is removed.
• Disconnect the fasuton terminals from the Breaker.
Reshuffling switch (Microswitch)
• The Reshuffling switch is taken out from the Case of rotary
switch.
• Disconnect the fasuton terminals from the Reshuffling
switch.
2. Remove a Unit cover from the Motor comp..
3. The Handle shaft is removed and the Fixing lever is
removed.
18