Related Manuals for YOTRIO Target Southport FRS50006I-C1
Summary of Contents for YOTRIO Target Southport FRS50006I-C1
- Page 1 Southport egg chair style # FRS50006I-C1/C2/C3/C4 dpci # 009000853/0686/0256/0258 >>assembly instructions...
-
Page 2: Important Warning
Congratulations on your latest Target purchase. Now what? Don't start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you'll be on your way to transforming your patio in no time. Good luck –... -
Page 3: Warranty
Target Corporation Toll Free at: 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday. Code: Yotrio 2020 before you begin 1. Check for damage or missing parts. Call 855-MYTGTHOME (855-698-4846) to order missing supplies. - Page 4 table of contents introduction hardware parts list assembly 7-10 QUESTIONS? Please call 855-MYTGTHOME (855-698-4846) parts and service. For faster service, have th e style number and DPCI number r eady when calling.
- Page 5 hardware (Part E)×4 (Part F)×4 (Part G)×4 (Part H)×2 (Part D)×5 M6*45 bolt with washer M6 nut M6*20 bolt with washer Washer Connecting (Part I)×1 (Part J)×1 hex wrench allen wrench...
-
Page 6: Item Description
ITEM DESCRIPTION QUANTITY back frame seat frame leg frame... - Page 7 step 01: (Part D)×5 (Part J)×1 allen wrench M6*20 bolt with washer ATTENTION: To avoid damage to your new patio furniture, please use either the carton or another soft surface such as carpet as a working surface to prevent product damage during assembly. 1.
- Page 8 step 02: (Part H)×2 Connecting 1. Place the leg frame (C) and seat frame (B) right side up on a soft surface such as carpet. 2. Attach the back frame (A) to the seat frame (B) and leg frame (C) by lining up screw holes on the seat frame (B) with corresponding screw holes on the back frame (A).
- Page 9 step 03: (Part G)×4 (Part E)×4 (Part F)×4 M6*45 bolt with washer M6 nut Washer (Part I)×1 (Part J)×1 hex wrench allen wrench 1. Attach the back frame (A) to the seat frame (B) and leg frame (C) by lining up screw holes on the seat frame (B) with corresponding screw holes on the back frame (A).
- Page 10 step 04 : Tighten all the screws. 2. Turn the chair to upright position on a flat level surface. Put the cushion on the chair. You are now ready to enjoy your new chair.
- Page 12 2020 Target. The Bullseye Design is a trademark of Target Brands Inc. All rights reserved.
Need help?
Do you have a question about the Target Southport FRS50006I-C1 and is the answer not in the manual?
Questions and answers