Home Decorators Collection 16986 Use And Care Manual page 7

Installation (continued)
5
Installing the fixture body to the
desired position
Place the base (E) of the fixture body over the desired
positon, and ensure the heads of the ahchor (GG) come
through the holes of the base (E).
Place the flat washers (FF) and lock washers (EE) over
the ahchors (GG), and tighten the nuts (DD) onto the
ahchor(GG) until the base (E) is held firmly against the floor.
6
E
DD
EE
FF
GG
7
Installing the light bulb
Install the light bulb (not included) into the lantern
assembly (A) socket. Use three 100-watt medium base
bulbs or less.
NOTE: You can also use three 23W maximum medium base (E26)
SBCFL (sold separately). Do not exceed the recommended wattage.
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
A