Vizio V Series User Manual page 16

Mode & Level Settings
Function
Bass Level
Treble Level
Night Mode
Auto VA
Dolby Audio or
DTS signal
ENG - 10
LED Behavior
Press the BASS button and then use the Next/Previous buttons to increase/decrease
Three center LEDs
the bass level. The LED indicators will move to the right with increasing levels and left with
indicate level 0 decreasing levels. Decreasing the bass level to the lowest setting will reduce bass and
subwoofer levels on the bar. This is best for watching TV late at night in a quiet environment.
Three center LEDs
Press the TREB button and then use the Next/Previous buttons to increase/decrease
indicate level 0. the treble level. The LED indicators will move to the right with increasing levels and left with
decreasing levels.
Press the NIGHT button and then use the Next/Previous buttons to enable/disable Night
On
Mode. When enabled (On), the sound bar will lower bass frequency levels to provide a more
quiet environment (ideal for apartment living and homes with sleeping children).
Off
Note: Night mode will be OFF the next time the sound bar is turned on.
Off
Press and hold the INPUT button on the remote for 10 seconds to enable/disable AUX VA.
Both
Press and hold the Bluetooth
AUX
Voice Assistant Bluetooth (BT). Refer to Connecting to a Voice Assistant on page 15 for
more information.
BT
Dolby Audio: white LED Dolby Audio and DTS are available on the HDMI ARC and Digital
Optical audio inputs. When a Dolby Audio or DTS signal is detected, the LED will light up
DTS signal: amber LED
for 5 seconds before fading away.
Description
—or—
button on the remote for 10 seconds to enable/disable