ADJUSTING THE NETWORK SETTINGS
Your TV is Internetready, featuring both an Ethernet port and builtin highspeed
wireless internet.
TIP: If your TV is connected to a network with an Ethernet cable,
you will not see the wireless network connection menu. You must
unplug the Ethernet cable to set a wireless network connection.
Connecting to a Wireless Network
Network
To connect to a wireless network whose
network name (SSID) is being broadcast:
Wired Connection
Menu > Network >
Wireless Access Points
Choose your network
>
Enter in the password
> Connect
Test Connection
Hidden Networks
Manual Setup
Network Information
To forget a saved network:
Highlight a saved wireless access point
> OK > Forget
If you do not see your wireless network displayed, click on:
More Access Points > Highlight your wireless network > Enter in
the password
> Connect
Testing Your Network Connection
To test your network connection:
Menu > Network > Test Connection
Connecting to a Hidden Network
To connect to a wireless network whose
network name (SSID) is not being broadcast:
Menu > Network > Hidden
Network > Enter the Access Point
Name > Connect > Enter in the
Disconnected
password
Changing the Manual Setup Settings
Advanced users can finetune the network
settings using the Manual Setup feature. The
security settings on your router may require
you to enter the TV's MAC address.
To change advanced network settings:
Menu > Network > Manual Setup > DHCP > Off
1. Use the Navigation and OK buttons to adjust each setting:
• IP Address — The IP address assigned to the TV.
• Subnet Mask — The subnet Exit 2D.
• Default Gateway — Your network's default gateway address.
• Pref. DNS Server — Your preferred domain name server address.
• Alt. DNS Server — Your alternate domain name server address.
2. Use the Navigation buttons on the remote to highlight Save and press OK.
To find the TV's MAC address:
Menu > Network > Manual Setup
You can find your TV's MAC address at the
bottom of the list. The MAC addresses for the
Enter Access Point Name
connections in use are displayed:
Enter your access point name. This is used
• RJ45 MAC — The Ethernet or RJ45 MAC
to connect to an access point with a hidden
SSID.
address may be needed to set up your
network when you have connected the TV
to your network when you have connected
the TV to your network with an Ethernet
(Cat 5) cable.
• Wireless MAC — The Wireless (WiFi) MAC
address may be needed to connect your TV
to your network with WiFi.
To view network information
Menu > Network > Network Information
3
Manual Setup
DHCP
Off
IP Address
__. __.__.__
Subnet Mask
__. __.__.__
Default Gateway
__. __.__.__
Pref. DNS Server
__. __.__.__
Alt DNS Server
__. __.__.__
RJ45 Mac
0:0:0:0:0:0
Wireless Mac
0:0:0:0:0:0
16