Table of Contents
Advertisement
EN | Operation
2. Connect the plug to the disconnected socket of the connection you want to test.
3. Connect the high-voltage measurement module to the high-voltage test adapter
according to the guided fault finding.
You can now perform measurements in accordance with the guided fault finding.
Detaching the plug connections
The plug connections have an automatic locking mechanism. To detach a plug connection:
1.
Make sure that the lever (red) is pulled out.
2.
Push in the tongue (orange) and pull the plug connection apart as far as it will go.
3.
Push the latch (black) in and pull the plug connection completely apart.
The plug connection is now detached.
12.VW.2210.0520_BA_V02_EN
VAS 6558/12
13
Advertisement
Table of Contents
