Contents 1. Safety information......................2 2. Technical information....................4 Attachment and body size..................6 4. Installation and connecting..................7 5. Control panel......................10 6. Menu setting.......................11 7. Channel function......................14 8. Circuit connecting diagram..................18 9. Cleaning and maintenances..................19 10.Troubeshooting......................20 11.Duty exonerative and copyright protection............21 Congratulations on choosing our company product! We thank you for your custom. ◆Please note that this product, as all the others in the rich my company range, has been designed and made with total quality to ensure excellent performance and best meet your expectations and requirements.
S A F E T Y I N F O R M AT I O N ■This lighting fixture is for professional use only - it is not for household use. Make sure all parts for fixing the projector are in a good state of repair. Make sure the point of anchorage is stable before positioning the projector.
Page 4
6 0 ℃ The maximun temperature that can be reached on the external surface of the fitting, in a thermally steady state,is 60℃。 Avoid contact bypersons and materials. Allow the fixture to cool for at least 5 minutes before handling. ■The light source The light source in this fixture shall be replaced by the manufacturer or its service agent or similar qualification.
T E C H N I C A L I N F O R M AT I O N ● Power supplies available:100V~240V~ 50/60Hz ● Power :403W ● LED chip:TYANSHINE 20W,RGBW 4 in 1 LED chip. ● LED QTY:19PCS. ● Average life:30000h ●...
INSTALLATION AND CONNECTING Safety rope Installing the projector- Fig. 3 Compact,standard clamp system equipped & easy installation The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall. WARNING:with the exception of when the projector is positioned on the floor, the safety rope must be fitted. This must be securely fixed to the support structure of the projector and then connected to the fixing point at the centre of the base.
Page 9
power in power end The N terminal is connected with the blue line. Ground The L terminal is connected with the brown line. The stage lighting power supply can not be more than 2pcs pre line ● connection to the eiectricty mains must be carried out by a qualified electrical ●...
Page 10
DMX512 in signal end DMX - output DMX-input 1 - Shield - Shield 2 - Signal (-) - Signal (-) - Signal (+) - Signal (+) - Not connected - Not connected - Not connected - Not connected...
C O N T RO L PA N E L ENTER RIGHT LEFT Up arrowhead : page up Down arrowhead : page down Left arrowhead : reduce Right arrowhead : increase DOWN Enter : OK function Exit : in the choice screen DMX: Information Personal...
M E N U S E T T I N G Main menu Ⅰ menu Ⅱ menu Ⅲ menu IV menu Address > 001 - 512 Extended(24) Channel mode > Standard(15) > setting Blackout State > Hold Auto Power on time >...
Page 13
Main menu Ⅰ menu Ⅱ menu Ⅲ menu IV menu 12000Hz Led Hz > 24000Hz Linear Square Dimmer Curve > I-Square Scurve > Fade Dimmer Speed > Snap Silent mode Fan mode > Standard mode Person Hot mode English Language > Chinese Always Backlight time...
Page 14
Main menu Ⅰ menu Ⅱ menu Ⅲ menu IV menu Memory IC OK/Reset/Error Pan Encodeer OK/Reset/Error Pan Drive IC OK/Reset/Error Tilt Encoder OK/Reset/Error > Fixture state > > Tilt Drive IC OK/Reset/Error OK/Reset/Error Tilt OK/Reset/Error Zoom OK/Reset/Error > 0 - 255 Adjust >...
C H A N N E L F U N C T I O N Standard(15CH) Channel Percentage Function Note 0 - 255 0 - 100 0 - 255 0 - 100 Pan fine 0 - 255 0 - 100 Tilt 0 - 255 0 - 100...
Page 16
Channel Percentage Function Note 0 - 255 0 - 100 Green 0 - 255 0 - 100 Blue 0 - 255 0 - 100 White Color Macro 0 - 3 Reserved 4 - 255 Color Macro 0 - 255 0 - 100 Zoom...
Page 17
Extended(24CH) Channel Percentage Function Note 0 - 255 0 - 100 0 - 255 0 - 100 Pan fine 0 - 255 0 - 100 Tilt 0 - 255 0 - 100 Tilt fine 0 - 255 0 - 100 P/T Speed Function 0 - 10...
Page 18
Channel Percentage Function Note 0 - 255 0 - 100 Green 1 0 - 255 0 - 100 Blue 1 0 - 255 0 - 100 White 1 0 - 255 0 - 100 Red 2 0 - 255 0 - 100 Green 2 0 - 255 0 - 100...
CLEANING AND MAINTENANCES ■1.In order to ensure the projector could work normally. It should be kept clean always . The lens should also be regularly cleaned to maintain an optimum light output. Do not use any type of solvent on lens. It will damage the projector. ■2.Suggestion: The continue usage of the light don't exceed 4 hours.
It is recommended some solution for some normal trouble shooting. Any inextricability problems should always be handling by the professional person. Disconnect the power supply before maintenance the light. ■ LED off / LED: 1.Please check if install the suitable voltage. 2.Please check whether the led will reach the end of their life can explode;...