Related Manuals for NiSi S6
Summary of Contents for NiSi S6
- Page 2 English The NiSi S6 filter holder system has been designed based on the patented technology of the V6. This holder system allows the use of an integrated PRO CPL and two 150mm filters without vignetting through 360 degrees of rotation. It also includes a rounded screw-in thread with an external rotation wheel.
-
Page 3: Adapter Installation
English Lock screw External Front Back rotation wheel Contractible cycle Four marked points Locking ring for lens Adapter Installation • Rotate the locking ring anticlockwise and make sure that the contractible cycle is at widest bore. • Install the adapter by inserting the four marked points into the groove of the lens hood. •... - Page 4 Check that the holder is securely installed by rotating it to and fro. Note: 1. The S6 filter holder system is suitable for filters 150mm in width and 2mm in thickness. 2. The holders all made of aluminium which can be noisy while rotating.
- Page 5 English Installation with a circular filter 1. Place the circular filter on the front surface of 2. Install the adapter with the circular filter in the adapter while turning anticlockwise with the place (See page 11). wheel held secure. Check that the filter is firmly screwed in by rotating the filter clockwise.