Page 3
Know the watch Charging and data transmission port Bu on Speaker Screen Heart rate sensor Microphone Watchband...
Page 4
Install the App Scan the QR code below with your mobile phone, or search for the "Amazfit Watch" App in major application markets and have it installed.
Page 5
Turn Your Watch On/Off To turn on your watch, press and hold the bu on on its top right side. Your watch screen will light up and show a startup animation. The animation may play for several minutes upon initial startup. To turn off...
Page 6
Binding your watch Open the "Amazfit Watch" App on your mobile phone, log in and scan the QR code displayed on the watch for binding as prompted.
Page 7
Charging your watch A ach your watch to the charging cradle as shown in the below. Make sure to align the four charging pins on the backside of the watch with the ones on the charging cradle. Connect the charging cradle to a USB plug or a computer by using the provided USB cable.
Page 8
Safety Notice 1. The watch has the IP68 water and dust resistance rating, which can withstand soaking for 30 minutes in freshwater at about 1.5 meters deep with normal temperature, but does not support the usage inside showers, saunas, or swimming pools. 2.
Page 9
Regulatory Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
Page 10
Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 11
- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Please take a ention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Page 12
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. this device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operation of the device. IC: 21806-A1811 ICAN ICES-3(B)/NMB-3(B) Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts...
Page 13
Under Industry Canada regulations, this radio transmi er may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmi er by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Page 14
Disposal and Recycling Information The use of the WEEE Symbol indicates that the following product may not be treated as a household waste. By ensuring that this product is disposed correctly, you will help protect the environment. For a more detailed information about the recycling of the following product, please contact your local authority, your household waste disposal service provider, or the shop where you have purchased the product.
Page 15
For more regulatory information and product certification/compliance logos related to Amazfit Verge, please go to Se ings->About->Regulatory on your watch. 14 14...
Need help?
Do you have a question about the Verge and is the answer not in the manual?
Questions and answers