Advertisement
(For WW140/151/182/172/183/173 models)
Removes odour, add minerals in the purified water
without mixing impure water.
(Only with WW182EP/WW183EPR)
Out sediment Filter with antiscalant module:
gardening
for WW150/151/152/140/130/182/172/183/173/162 models.
RO Recovery Plus*
After installation, discharge water for the first time
when water tank is full. Same process is to be
followed after every filter change or digital sterilization.
Appropriate time tank to fill the tank to the fullest is
1 hour, depending on water pressure, temperature etc.
For RO Membrane Filter, around 25% of supplied
water (based on the tap water pressure of 3.5kgf/cm2
at water temp. of 25°C) will be purified.
While for RO Recovery Plus, around 50% of supplied
water (based on the tap water pressure of 1.5kgf/cm2,
750ppm TDS at water temp. of 25°C) will be purified
and remainder will be drained.
CAUTION:
Outsediment filter may get choked in
abnormal turbidity (Sand & mud) condition, it is
suggested to switch ON water purifier after 1-2 hour of
overhead tank filling so that sand/mud will get settled.
Outsediment filter should be cleaned regularly to
prevent choking in above condition for better
performance.
(in litres)
13
Advertisement
