DC power cord for normal operation. notes regarding the operation of your monitor. • Please use approved power cord provided by Philips all the time. If The Philips guarantee applies provided your power cord is missing, please the product is handled properly for...
Page 4
1. Important continuous screen use is likely to not expose the monitor to dust, be better than a 15-minute break rain, water, or excessive moisture every two hours. Try to keep your environment. eyes from eye strain while using the • If your monitor gets wet, wipe it with screen for a constant period of time dry cloth as soon as possible.
1. Important Warning 1.2 Notational Descriptions Failure to activate a screen saver, or The following subsections describe a periodic screen refresh application notational conventions used in this may result in severe “Burn-in” or “after- document. image” or “ghost image” symptoms that will not disappear and cannot be Notes, Cautions and Warnings repaired.
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily This marking on the product or on entails participation in national take-...
Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
What is On-Screen Display (OSD)? Description of the control buttons On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window.
Page 9
2. Setting up the monitor The OSD Menu 322M8CZ: Below is an overall view of the structure Main menu Sub menu of the On-Screen Display. You can use 1, 2, 3,4 LowBlue this as a reference when you want to Mode Input work your way around the different...
Page 10
2. Setting up the monitor Note 322M8CZN: • MPRT: To reduce motion blur, LED Main menu Sub menu backlight will strobe synchronously 1, 2, 3,4 LowBlue Mode with screen refresh, which may Input cause noticeable brightness change. 1 HDMI 1.4 2 HDMI 1.4 DisplayPort • MPRT is to adjust brightness for blur...
2. Setting up the monitor Resolution notification 2.3 Remove the Base Assembly This monitor is designed for optimal for VESA Mounting performance at its native resolution, Before you start disassembling the 1920 × 1080. When the monitor is monitor base, please follow the powered on at a different resolution, an instructions below to avoid any possible alert is displayed on screen: Use 1920 ×...
Page 12
2. Setting up the monitor 3. Use a screwdriver to remove the screws on the arm,and then detach the arm/stand from the monitor. 0° 90° -5° * Display design may differ from those illustrated. Warning • To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward Note...
There are multiple modes to select: FPS, brightness, contrast, color and sharpness Racing, RTS, Gamer1, Gamer2, LowBlue in real time. Whether you're working Mode and Off. with text applications, displaying images or watching a video, Philips SmartImage delivers great optimized monitor performance. ...
What is it? time. Developed for wellbeing, Unique technology that dynamically Philips LowBlue Mode setting uses a analyzes displayed content and smart software technology to reduce automatically optimizes a Monitor's harmful shortwave blue light.
5. Technical Specifications 5. Technical Specifications Picture/Display Monitor Panel Type Backlight W-LED Panel Size 31.5" (80 cm) Aspect Ratio 16:9 Pixel Pitch 0.364 x 0.364 mm 3000:1 (TPM315WF1-HP06.S) Contrast ratio (typical) 4000:1 (TPM315WF1-1B058.L) Optimum Resolution 1920x1080 @ 60Hz Viewing Angle 178°...
Page 17
5. Technical Specifications Off mode 0.3 W 0.3 W 0.3 W AC Input AC Input AC Input Heat Dissipation* Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 60Hz 230VAC , 50Hz 148.81 BTU/hr 149.15 BTU/hr 149.49 BTU/hr Normal Operation (typ.) (typ.)
Page 18
5. Technical Specifications Note This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
5. Technical Specifications 322M8CZ: 5.1 Resolution & Preset Modes H. freq Resolution V. freq (Hz) Maximum Resolution (kHz) 322M8CZ: 31.47 720 x 400 70.09 1920 x 1080 @ 60Hz (VGA) 1920 x 1080 @ 165Hz 31.47 640 x 480 59.94 (HDMI 1.4/DP 1.2) 35.00 640 x 480...
Page 20
5. Technical Specifications 322M8CZN: Note • Please notice that your display H. freq Resolution V. freq (Hz) works best at native resolution (kHz) of 1920 x 1080. For best display 31.47 720 x 400 70.09 quality, please follow this resolution recommendation.
6. Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
7.1 Philips’ Flat Panel Monitors single black pixel. Other combinations Pixel Defect Policy of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the Types of Pixel Defects...
Page 23
Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or panel in a Philips flat panel monitor sub pixels that are always dark or 'off'. must have pixel or sub pixel defects That is, a dark dot is a sub-pixel that...
Page 24
7. Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* ≥ 15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
• Disconnect the monitor from mains This page deals with problems that can power source immediately for safety be corrected by a user. If the problem • Contact with Philips customer still persists after you have tried these service representative immediately. solutions, contact Philips customer service representative.
• Shut down your computer, resolution. disconnect your old monitor and reconnect your Philips monitor. Green, red, blue, dark, and white dots • Turn on your monitor and then turn appears on the screen on your PC.
Page 28
Can I connect my monitor to any soft cloth. For extensive cleaning, PC, workstation or Mac? please use isopropyl alcohol. Do Ans.: Yes. All Philips monitors are fully not use other solvents such as compatible with standard PCs, ethyl alcohol, ethanol, acetone, Macs and workstations.
Page 29
EDFU? Always activate a moving screen Ans.: Important Information manual saver program when you leave can be download on the Philips your monitor unattended. website support page. Always activate a periodic screen refresh application if your monitor will display unchanging static content.
Page 30
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.
Need help?
Do you have a question about the Momentum 322M8 and is the answer not in the manual?
Questions and answers