Modal Electronics COBALT8X User Manual page 10

8 voice polyphonic extended virtual-analogue synthesiser
Table of Contents

Advertisement

UI Combinations
FX
Press FX1 / FX2 / FX3 button repeatedly to change the FX type of the slot
Hold FX1 / FX2 / FX3 button to reset the FX type of the slot to 'None'
Turn the 'B' encoder into the negative range for the slot with a Delay FX assigned to
access synced delay times
Press FX1 + FX2 + FX3 to jump to the 'FX Preset Load' parameter
Global Settings
When the screen is displaying the 'Reset' option, press the 'Edit' switch and follow the
confirm instructions to reset all global settings to the factory default settings. Please note
that this will also reset the Main Volume and Tempo parameter values but your presets
will be unaffected
Hold the 'Patch' button and turn the 'Volume' encoder to control the Patch Gain
parameter.
Screen Parameter List
If a screen parameter is crossed out this means that it is 'inactive' (and can't be controlled)
due to the value or state of other parameters or settings.
If a screen parameter value is underlined to indicate the currently selected value, you will
need to use the Edit encoder switch to apply newly selected values.
18
19

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the COBALT8X and is the answer not in the manual?

Questions and answers

Table of Contents