Package Contents; Technical Data; General Notes - Scheppach HSC130 Translation From The Original Operating Manual

scheppach Fabrikation von
Holzbearbeitungsmaschinen GmbH
D-89335 Ichenhausen
Block splitter with upper and lower blades
Extension bar for cutting lever
Model
Maximum cutting width
Minimum cutting height
Maximum cutting height
Adjustment of cutting height
Weight
Technical changes reserved
1. After unpacking, check all parts for
possible transport damages. In the
case of complaints, the carrier must
be notified at once.
2. Later claims are not recognized.
3. Check the delivery for completeness.
4. Familiarize yourself with the machine
by means of the operating instructions
prior to installation.
5. For accessories as well as expenda-
ble and replacement parts, use only
original parts. Obtain replacement
parts from your dealer.
6. When ordering, give our article
numbers as well as the type and
model year of the device.
Note:
According to the applicable product liability
law, the manufacturer
of this device is not liable for damages
occurring to or through use of this device
in the case of:
• improper handling,
Manufacturer

Package contents

Technical Data

General notes

13
HSC130
330 mm
26 mm
140 mm
manual
41 kg
• failure to observe the operating inst-
ructions,
• repairs by unauthorized specialists,
• installation and exchange of repla-
cement parts that are not original,
inappropriate use.
We recommend:
Before installation and startup, read
the entire text of the operating instruc-
tions.
These operating instructions should make
it easier
to familiarize yourself with your machine
and to use its intended installation options.
The operating instructions contain impor-
tant
notes on how to work with the machine
safely, correctly and economically and on
how to avoid danger, save repair costs,
minimize downtimes and increase the reli-
ability and operating life of the machine.
In addition to the safety requirements of
these operating instructions, it is absolute-
GB