SERVICE INFORMATION FOR EEPROM
POWER ON
It is possible at any function.
FLD "NO DISC" status
(ex. It is possible at FLD "NO USB" status, too.)
This is an example.
Remote control '
' + Front 'STOP'
push same timing during 5 seconds.
FLD "op0-....."
Move to appropriate position and
make changes with remote control.
(
,
,
, REPEAT)
Press STOP key
FLD "WRITE OK"
Remote control '
' +
Front 'STOP' push same timing.
FLD "e2p clr"
Completed
1-7