CONTROLS
Activating
Position of switch:
The indicator light in the instrument cluster
is illuminated when the low beams are
switched on.
System limits
The automatic headlight control cannot
serve as a substitute for your personal judg-
ment of lighting conditions.
For example, the sensors are unable to de-
tect fog or hazy weather. In these situa-
tions, switch the lights on manually.
Daytime running lights
General information
Position of switch:
The daytime running lights light up when
the ignition is switched on. After the igni-
tion is switched off, the parking lights light
up in position
Activating/deactivating
In some countries, daytime running lights
are mandatory, so it may not be possible to
deactivate the daytime running lights.
Via the Central Information Display (CID):
1.
"My MINI"
2.
"Vehicle settings"
3.
"Lighting"
4.
"Exterior lighting"
5.
Select the desired setting.
Settings are stored for the currently used
vehicle key.
142
Lights
,
,
.
Online Edition for Part no. 01402667330 - VI/19
Cornering light
General information
Position of switch:
In tight curves, for instance on mountain-
ous roads or when turning, an additional,
cornering light is switched on that lights up
the inside of the curve when the vehicle is
moving below a certain speed.
The cornering light is automatically
switched on depending on the steering an-
gle or, where applicable, the use of turn sig-
nals.
When driving in reverse, the cornering
lights may be automatically switched on re-
gardless of the steering angle.
Adaptive headlight range con-
trol
The adaptive headlight range control fea-
ture balances out acceleration and braking
processes as well as the vehicle load condi-
tions in order to avoid dazzling oncoming
traffic. Illumination of the road is optimized.
High-beam Assistant
Concept
The high-beam Assistant detects other traf-
fic participants early on and automatically
switches the high beams on or off depend-
ing on the traffic situation.
General information
The high-beam Assistant ensures that the
high beams are switched on, whenever the
traffic situation allows. In the low speed
range, the high beams are not switched on
by the system.