Advertisement
Available languages
Available languages
•
This kind of socket can be reconnected. Before opening the socket box, make sure the power supply
is halted.
•
When changing the connecting wire, please use the following type of wire: H07RN-F 3G 1.5 mm². The
length of the wire is at least 1.4 meters.
•
Please make sure to correctly connect the green/yellow grounding safety lead wire to the connecting
location with grounding safety lead wire mark.
•
The wires must be led to the connection terminal in the shortest possible way Grounding safety lead
wire should be 8 mm longer than required.
•
The lead wire must be connected firmly to the binding post and all the lead wires should be inside the
binding post.
•
The spray-proof rubber packing and the sealing ring must be mounted in place precisely. Fasten the
screws properly.
•
Use the supplied remote control to switch the sockets on/off separately. With appropriate batteries
inserted, the RC automatically connects to the corresponding socket.
•
When exchanging the battery, be sure to maintain the correct polarity as indicated on the inside of
the battery compartment. Exlusively use batteries of the equal type.
Article #.
Supply Line
Maximum Load
IP Protection Class
Radio Frequency (RC)
Range (RC)
Battery Type (RC)
Scope of Delivery
Installation and Usage
Technical Data
10028985
10028986
10028991
1.5m
Voltage
250V AC, ~50Hz
10A, 2500W
IP44
433.92MHz
70m (max.)
8LR932 1811A 23A (ca.28,5mm×Ø10,3mm) 12 V
10028987
10028988
10028992
3.0m
250V AC, ~50Hz
10A, 2500W
IP44
433.92MHz
70m (max.)
Device, remote control, instruction manual
10028989
10028990
10028993
5.0m
250V AC, ~50Hz
10A, 2500W
IP44
433.92MHz
70m (max.)
6
Advertisement
