Summary of Contents for Graham Field Lumiscope 1147
Page 1
Blood Pressure Monitor Automatic Wrist Type Model 1147 Instruction Manual Read this manual before operating your Blood Pressure Monitor. Save this manual for future use. 1147-INS-LAB-RevD19...
SAFETY GUIDELINES—READ BEFORE USE The safety statements presented in this chapter refer to the basic safety information that the Blood Pressure Monitor (BPM) user shall pay attention to and abide by. There are additional safety statements in other chapters or sections, which may be the same as or similar to the following, or specific to the operations.
INTENDED USE This device is intended for the noninvasive measurement of systolic and diastolic arterial blood pressure and pulse rate in adults. The device is intended to be used by adults, at room temperature, with skin contact. CONTRAINDICATIONS WARNING: Do not use this appliance on infants, children, or persons who cannot express their own intentions.
PRODUCT DESCRIPTION SYMBOLS KEY Systolic Pressure Diastolic Pressure Direct Current Type BF Applied Part Attention, consult accompanying documents Manufacturer Serial Number Irregular Pulse Detection Keep dry Do not dispose of the device or batteries with household waste. Follow operating instructions Pumping Pumping failure Excessive body movement detected during...
Page 6
Humidity Limitation Symbols Key continued Battery recycling symbol Restriction of Hazardous Substances REACH symbol- Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) is a European Union regulation. Power "ON" / "OFF" Protection against solid foreign objects > 12.5mm Ø IP20 and no water-proof test 1147-INS-LAB-RevD19...
ABOUT BLOOD PRESSURE What is blood pressure? Blood pressure is the pressure produced by the force of blood flowing against artery walls after the heart ejects blood into the vessel system. Systolic and diastolic pressures Systolic pressure represents the highest pressure during heart contraction and diastolic pressure is the lowest pressure while heart is resting.
Page 8
Blood pressure fluctuation and variation Human blood pressure fluctuates and will vary 24 hours a day. Blood pressure measurement can be affected by the measurement position, posture, and physiologic condition as well as factors such as eating, bathing, exercising, smoking, drinking alcohol, stress, mental tension, breathing, conversation, movement, temperature or humidity change, etc.
DEVICE OVERVIEW Info: This product includes one blood pressure monitor, one cuff, one instruction manual, three AAA alkaline batteries, and one storage bag / case. DISPLAY OVERVIEW 1147-INS-LAB-RevD19...
SETUP BATTERY INSTALLATION 1. Remove the battery cover and insert batteries into the battery compartment with polarities “+” and “-” matching polarity indicator. Replace the battery cover. 2. Use only fully-charged AAA alkaline batteries. 3. Always replace all three batteries at the same time. 4.
OPERATION OPERATION SAFETY s NOTICE: The unit is not waterproof. Do not immerse this instrument in liquid. WARNING: Read and follow the entire instruction manual before operating this blood pressure monitor. WARNING: Do not press the POWER button if the cuff has not been properly applied.
WARNING: Take into consideration the electromagnetic compatibility of the unit (e.g. disruptions to the power supply, radio frequency interference, etc.) Only use the unit indoors. To avoid inaccurate results due to electromagnetic interference between electrical and electronic equipment, do not use the unit near mobile phones or microwave ovens.
MEASUREMENT POSTURE 1. Wait at least thirty minutes after finishing a caffeinated drink or cigarette before measurement. 2. Sit down and relax for at least five minutes before measurement. 3. Wait at least five minutes between repeated measurements. 4. Use the same arm consistently for each measurement (preferably the left) and take the measurement at about the same time every day.
TAKING A MEASUREMENT Info: Remain still and do not talk during measurement. 1. Press the USER button to choose user number for memory storage. User selection can also be made by pressing the USER button while readings are displayed after measurement is completed. 2.
MEMORY FUNCTION 1. Press the USER button to select desired user number for recalling memories. 2. Press the MEMORY button to recall the last reading stored in the memory. 3. Press the MEMORY button repeatedly to recall the next set of previous readings.
MAINTENANCE WARNING: Do not disassemble or modify the device or cuff. s NOTICE: Do not drop the device. It is not shock proof. s NOTICE: Do not twist the cuff. s NOTICE: Do not store the device and cuff in direct sunlight, high temperature, moisture, or severe dust.
TROUBLESHOOTING Pumping failure. Ensure the cuff’s bottom edge is approximately inch (1 ~ 2 cm) above your palm line and not wrapped too tightly. Refasten the cuff and measure again. Excessive body movement detected during measurement. Refasten the cuff and measure again. Insufficient pulse detected for measurement.
LIMITED WARRANTY SCOPE OF WARRANTY GF Health Products, Inc. (“GF”) warrants to the original purchaser only that it will replace or repair components, at GF’s sole discretion, that are defective in material or workmanship under normal use and service. All warranties are conditioned upon the proper use of the products strictly in accordance with good commercial practice and applicable GF instructions and manuals, including proper use and maintenance.
Need help?
Do you have a question about the Lumiscope 1147 and is the answer not in the manual?
Questions and answers