Advertisement
Instructions for Operation and Care of Water Bath SP-1600-A-220
The
Water Bath
is a water tank capable of heating water within a set temperature range of 68ºC (155ºF) to 79ºC (175ºF).
The
unit
is intended and designed to heat and soften thermoplastic splinting material at a user-entered set water
temperature. Proper splint material heat-up temperature & duration is based on the splint material manufacturer's
requirements and instructions. The
insulated and has variable temperature settings with a LED display and a concealed wire-wound heating element.
The
Water Bath
has an illuminated ON-OFF power switch and a water-resistant temperature controller conveniently
located at the front of the appliance. The temperature is easily adjustable by turning the thermostat knob. Fuses and
power cord inlet are located on the right side of the appliance. A durable plastic lid handle is provided on the lid and helps
minimize contact with warm surfaces.
Model No. SP-1600-A-220
Electrical Specifications: 220 Volts AC • 1440 Watts • 8 Amps
Inner Tank Dimensions:
Inner Tank Capacity:
24 5 8 "
(625)
8"
(203)
2
WHITEHALL MANUFACTURING • P .O. BOX 3527 • City of Industry, CA 91744-0527 U.S.A
Phone (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862 • Web: www.whitehallmfg.com
Water Bath
is primarily constructed of Type 304 Stainless Steel material, is internally
559 x 660 x 127 mm Deep (22" x 26" x 5" Deep)
28.5 Liters, 76.2 deep water pool
(
7.5 Gallons, 3" deep water pool)
36" (914)
31 3 4 " (806)
On/Off Power
Switch
Fuses
Power Inlet
7 1 4 "
(184)
Temperature
Control Knob
6 1 2 "
Drain
Assembly
(165)
18"
(457)
Advertisement
