Advertisement
Quick Links
SHARK X 2.0
Model FS81241
Model FS81241
Model FS81242
Model FS81242
Model FS81243
Model FS81243
Model FS81244
Model FS81244
Model FS81245
Model FS81245
1
S4
S1
S3
S2
3
1. Hour Hand
1. Hour Hand
2. Minute Hand
2. Minute Hand
3. Second Hand
3. Second Hand
S1 - Start/stop button
S1 - Start/stop button
S2 - Lap/reset button
S2 - Lap/reset button
S3 - Mode button
S3 - Mode button
S4 - Light button
S4 - Light button
TO SET THE ANALOG TIME
TO SET THE ANALOG TIME
1. Pull crown out to frist click position B.
1. Pull crown out to frist click position B.
2. Turn crown to set time.
2. Turn crown to set time.
3. Push crown back to position A.
3. Push crown back to position A.
DISPLAY MODES
DISPLAY MODES
The watch has four display modes:
The watch has four display modes:
HOME TIME (TIME), HOME TIME
HOME TIME (TIME), HOME TIME
ALARM (ALM1), STOPWATCH (STW)
ALARM (ALM1), STOPWATCH (STW)
and COUNTDOWN TIMER (TMR).
and COUNTDOWN TIMER (TMR).
To change from one display mode to
To change from one display mode to
another, press S3 button once. The
another, press S3 button once. The
mode description will appear for 2
mode description will appear for 2
seconds before the selected mode is
seconds before the selected mode is
activated.
activated.
HOME AND FOREIGN DISPLAY
HOME AND FOREIGN DISPLAY
To display FOREIGN TIME, press S2
To display FOREIGN TIME, press S2
button when HOME TIME is displayed.
button when HOME TIME is displayed.
The mode description (TM-2) will
The mode description (TM-2) will
appear shortly before FOREIGN TIME
appear shortly before FOREIGN TIME
is displayed. To change back to HOME
is displayed. To change back to HOME
TIME, press S2 button.
TIME, press S2 button.
To display the daily FOREIGN TIME
To display the daily FOREIGN TIME
ALARM, press S2 button when HOME
ALARM, press S2 button when HOME
TIME ALARM is displayed. The mode
TIME ALARM is displayed. The mode
description (ALM2) will appear shortly
description (ALM2) will appear shortly
before FOREIGN TIME ALARM is
before FOREIGN TIME ALARM is
displayed. To change back to HOME
displayed. To change back to HOME
TIME ALARM, press S2 button.
TIME ALARM, press S2 button.
TRIM
TO SET THE DIGITAL TIME AND
2. Press S1 button once to activate the
CALENDAR
alarm. Alarm indicator
will appear.
1. Press S3 button to select time mode.
3. Press again to activate the hourly
2. Press S2 button to toggle between
chime. Chime indicator
HOME TIME and FOREIGN TIME
appear.
mode to set.
4. Press the third time to activate both
3. Press and hold S2 button for two
functions. Both of the indicators will
seconds until the "SET" message
appear.
appears and the second digits blink.
5. Press the fourth time to deactivate
4. Press S1 button to reset the second
both functions. Both of the
digits to 00.
indicators will disappear.
5. Press S3 button, the minute digits
will blink.
WHEN AN ALARM OR HOURLY
6. Press S1 button to set the minute
digits. Holding down the button will
CHIME GOES OFF
speed up the process.
A tune will go off by the hour if the
7. Press S3 button, the hour digits will
hourly chime function is activated.
blink.
2
8. Press S1 button to set the hour
An alarm tune will be emitted for
digits.
around 20 seconds at the designated
A
9. Follow the same pattern to set date,
time when the alarm is activated. To
B
month, day (of the week), hour
stop the tune, press any button.
format and calendar format.
10.To set the hour format, press S1
TO USE THE STOPWATCH
button to toggle between 12-hour
1. Press S3 button to select
and 24-hour format. The P.M.
STOPWATCH mode.
indicator may be displayed to
2. The stopwatch will then be displayed
indicate the time period 12:00A.M.
in its current state – reset, running,
– 11:59 P.M. in 12-hour format.
or stopped.
11.To set the calendar format, press
3. To resume a counting, press S1
S1 button to toggle between M-D
button to resume from where it left
(month-date) and D-M (date-month)
off.
format.
4. To start a new counting, reset the
12.After finish making all the settings,
stopwatch to zero first.
press S2 button to confirm.
Press S1 button to stop counting,
then press S2 button to reset
NOTE: The chosen hour and calendar
counter to zero.
formats will apply to both HOME TIME
mode and FOREIGN TIME mode.
For the measurement of elapsed time:
In STOPWATCH mode,
NOTE: In FOREIGN TIME settings, only
1. Press S1 button to start counting.
minutes, hours, date, month and day
2. To stop counting, press S1 button
are open to setting.
once. Press S1 button again to
resume from where it left off.
TO SET THE ALARM TIME
3. To reset to zero, press S1 button to
1. Press S3 button to select alarm
stop counting, then press S2 button
mode.
to reset the counter to zero.
2. Press S2 button to toggle between
HOME TIME ALARM and FOREIGN
For the measurement of split time:
TIME ALARM mode to set.
In STOPWATCH mode,
3. Press and hold S2 button for two
1. Press S1 button to start counting.
seconds until the "SET" message
2. While the stopwatch is running,
appears and the minute digits blink.
press S2 button once to register a
4. Press S1 button to set the minute
lap. The stopwatch is still running
digits. Holding down the button will
in the background.
speed up the process.
To display the currently accumulated
5. Press S3 button, the hour digits will
time, press S2 button again.
blink.
3. Repeat the last step until all the
6. Press S1 button to set the hour
laps have been registered.
digits.
4. To stop counting, press S1 button
7. After finish making all the settings,
once. Press S1 button again to
press S2 button to confirm.
resume from where it left off.
5. To reset to zero, press S1 button to
TO TURN ON/OFF THE ALARM
stop counting, then press S2 button
to reset the counter to zero.
AND HOURLY CHIME
In alarm mode,
NOTE: You can leave the stopwatch
1. Press S2 button to toggle between
running while switching over to other
HOME TIME ALARM and FOREIGN
TIME ALARM mode to set.
operating modes.
TO SET THE TIMER
1. Press S3 button to select TIMER
mode.
will
2. Press S2 button to alter the timer
setting among 1, 3, 5, 10, 15, 20, 25,
30, 45 and 60 minutes.
TO USE THE TIMER
In TIMER mode,
1. Press S1 button to start counting.
2. To stop counting, press S1 button
once. Press S1 button again to
resume from where it left off.
3. To reload the TIMER, press S1
button to stop counting and then
press S2 button.
4. After reaching zero in a countdown,
a tune will be emitted. To stop the
tune, press any button, the TIMER
will reload automatically.
NOTE: You can leave the timer running
while switching over to other operating
modes.
TO USE THE BACKLIGHT
Press S4 button to turn on the backlight
NOTE WHEN REPLACING BATTERIES
When changing the battery please note
that there is an INSULATOR PAD
between the small and large batteries.
Please make sure that you keep this
pad and reuse it in the same manner
after inserting the new batteries. The
INSULATOR PAD needs to be placed
on top of the small battery before
inserting the large battery. This pad
secures the small battery and ensures
the best contact for both batteries.
To reduce carbon foot print, these
Freestyle instructions are printed with
soy inks on recycled paper.
FS1059-01
Shark X 2.0 IMS V1 21-10-2008
Advertisement
