Running The Initial Setup; Using The Tv Controller - Samsung The Serif LS01R Series User Manual

05 Running the Initial Setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. The Initial Setup allows you
to configure the basic settings for the TV to operate, such as broadcast reception, channel search, and network
connection, at one time.
• Before starting the Initial Setup, be sure to connect external devices first.
• To use the TV's smart features, the TV must be connected to the Internet.
• To perform the Initial Setup using the SmartThings app, you must connect your mobile device via Wi-Fi.
• If the pop-up for setup does not appear automatically in the SmartThings app on your mobile device, manually add
the TV using Add Device on the dashboard of the SmartThings app, and then continue with the set up process.
• The SmartThings app is available for mobile devices running Android 6.0 or higher or iOS 10 or higher.
• Noise may occur temporarily when the TV communicates with mobile devices.
You can also start the Initial Setup using the TV's menu (
Follow the instructions displayed on the Initial Setup screen and configure the TV's basic settings to suit your viewing
environment.

Using the TV Controller

You can turn on the TV with the TV Controller button on the lower-right corner of the back of the TV, and then use
the Control menu. The Control menu appears when the TV Controller button is pressed while the TV is On. For more
information about its usage, refer to the figure below.
To run an item on the menu, move the TV Controller button up, down, left, or right to move the focus to it, and then
press the TV Controller button.
Remote control sensor
English - 12
> Settings > General > Reset).
Control menu
: Smart Hub : Source
: Settings : Power Off
: Return
TV Controller button
• Press: Display the Control menu. / Select or run a focused
item on the menu.
• Press and hold: The running function is terminated.
• Up/Down button: Changes the channel.
• Left/Right button: Changes the volume.
The TV Controller button is located on the lower-right corner of
the back of the TV.