2.5” usb 2.0/1.1 external hard drive enclosure (1 page)
Summary of Contents for Freedom9 freeStor Mini 210
Page 1
Mini 210 & freeStor SBC Quick Installation Guide 2.5” USB drive enclosure & system backup software freedom succeed with connectivity solutions www.freedom9.com Revision 1.0...
Page 2
Installation and Manual CD Recovery CD Table of Contents Table of Contents: PART I - Hardware Installation for the freeStor Mini 210...3 PART II - Software Installation for the freeStor SBC Part IIa - Installing the software...5 Part IIb - Initial backup...9 Technical Specifications...14...
Page 3
5.4” x 3.1” x 0.6” (136 x 80 x 16 mm) Weight: 3.5 oz (100 g) PART I - Hardware Installation 1. Remove the freeStor Mini 210 hard drive enclosure from the package. 2. Unscrew the two screws on the connector end of the enclosure (Figure 1).
Page 4
Figure 5: Rescrew these 2 screws 7. Connect one end of the included USB cable to the freeStor Mini 210, and connect the other end to a USB port on your computer (Figure 6). Figure 6: Connect the USB cable 8.
Page 5
PART IIb - Continued 11. Once the window closes, click “Finish” to continue with the backup (Figure 18). Figure 18: Partition Completed 12. On the next screen (Figure 19), select the drive(s) to back up by clicking the box to the left of the drive. Click “Next”. Figure 19: Select Backup Drives...
Page 6
PART IIa - Continued 6. On the next screen (Figure 3), you can select which folder to install the software to by clicking the “Browse...” button and selecting the folder. Click “Next” to continue. Figure 3: Installation Folder 7. Click “Next” on the next section (Figure 4). Figure 4: Administrator User...
Page 7
5. In the Prepare Backup Disk screen (Figure 11), select “Re- arrange Partition Table”. Click “Next”. Warning: Selecting “Re-arrange Partition Table” will cause all of the data on the freeStor Mini 210/310 to be erased. Figure 11: Prepare Backup Disk 6.
Page 8
PART IIa - Continued Figure 7: Installation Completed 12. To start freeStor SBC from Windows, click on the Start Menu, then Programs, then freedom9 freeStor SBC folder, then the freedom9 freeStor SBC icon (Figure 8). Figure 8: Starting freeStor SBC...