Connect Co; Connecting The Bg-Counter 2 To Power: 3 Options - Biogents BG-Counter 2 Instruction Manual

Connect CO

2
The CO bottle is not included, and must be provided by the
2
user.
There exist two different versions of the pressure regulator:
a) The preset regulator is adjusted to 2.0 bar and the outlet
pressure cannot be changed.
b) The adjustable pressure regulator must be set at 1.5 kg/
day (corresponding to 2.6 bar). Therefore, adjust pressure to
mark "C" on the dial.
The fittings of the regulators are either US CGA-320 or Euro-
pe W21.8x1/14 RH standards.
F12

Connecting the BG-Counter 2 to Power: 3 Options

3 options to connect the
BG-Counter 2 to power via
the 12 V power connection
1. Install the CO
it is tight by using a wrench or pliers [F12].
2. Connect the free end of the CO
[F13]: unscrew the nut on the outlet, thread the end of
the CO
tube firmly onto the outlet and re-screw the nut back
onto the outlet.
3. Now open the valve on the top of the CO
the release of CO
Option 1
Power cord with transformer
This is recommended if AC power is available at the counter location.
• Use only the provided AC adapter, and confirm local outlet style before
ordering:
• US: Nema 1-15
pressure regulator on tank and make sure
2
tubing to the regulator
2
tube through the nut, insert the end of the CO
2
.
2
F13
2
bottle to start
2
EN 9