Updating Firmware - Sylvania ROADSIGHT PLUS Manual

UPDATING FIRMWARE

1
Download the firmware file at www.sylvania-automotive.com/firmware and extract the file
from the archive.
2
Format the memory card and transfer the extracted file to the micro SD memory card.
3
Insert the memory card with the downloaded file into the dash cam slot.
4
Connect the device to a power source and turn it on.
5
The indicator light will flash while the firmware file is being downloaded to the device.
6
Upon completion of the process, the device will reboot automatically.
7
Check in the settings menu if the correct firmware version is displayed.
8
Format the memory card with the dash cam menu.
ATTENTION! If the memory card is not formatted after the update, the update process
will be started again the next time it is turned on.
ATTENTION! Do not turn off the dash cam power during the firmware update.