Table of Contents
Advertisement
CONNECTOR #6
PIN 1 — SIREN #1 SPEAKER
PIN 2 — SIREN #1 SPEAKER
PIN 3 — SIREN #2 SPEAKER (optional)
PIN 4 — SIREN #2 SPEAKER (optional)
PIN 5 — HORN
PIN 6 — HORN RING
PIN 7 — RADIO input
PIN 8 — RADIO input
CONNECTOR #7
PIN 1, 9, 10
— N/A
PIN 2 — PARK KILL input, default GROUND control. Optional positive control, see the software manual.
PIN 3 — +12V input from battery, feed used to measure the battery voltage.
PIN 4 TO 8
— logic inputs, default +12V triggers. Optional programmable to GROUND triggers, see
the software manual.
CONNECTOR #8, 9, 10, 11—
CONNECTOR #12
— 8 Pins: Inputs 9 to 16, ground activated ONLY.
RADIO VOLUME ADJUSTMENT
MICROPHONE VOLUME ADJUSTMENT
MICROPHONE JACK
5. LABELING INSTRUCTIONS
1. Using a small flat screwdriver, depress the side tabs and separate the front cover from the back cover.
2. Select the appropriate push button label from the enclosed label packet.
3. Orient the label in the same direction as the existing top row labels and with the top cover resting on a
flat surface, press it on.
4. Apply all required labels in the same way.
5. When all required labels are installed, re-install the front cover.
data input used to connect touchpad, lightbar or temperature sensors.
6
HORN / HORN RING relay connection
Jan 15, 2020
Advertisement
Table of Contents
