Controls - Toro MMX-650E-S Operator's Manual

Controls

Become familiar with all the controls before you start the
motor and operate the machine.
Clutch Lever
The clutch lever is used to engage and disengage motor
power to the paddles.
1
1. Clutch lever
Drum Latch
The drum latch secures the drum to the mix position (upright)
for mixing operations and when transporting the machine.
G019877
1. Drum latch
G019875
Figure 7
1
Figure 8
Dump Handle
Use the dump handle to rotate the drum to the dump position
and to rotate the drum to the mix position (upright).
1. Dump handle
Voltage Block
Use the voltage block to set the operating voltage for the
machine (Figure 10).
1. Voltage block
10
Figure 9
Figure 10