Page 2
MAGMATIC EFFECTS and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic...
C O N T E N T S General Information Limited Warranty (USA Only) Warranty Returns (USA Only) Safety Guidelines Maintenance Guidelines Fixture Overview Installation Instructions Specifications Dimensional Drawings...
Phoenix Connector (x1) Positive Wire Tip Sheath (x2) Negative Wire Tip Sheath (x2) CUSTOMER SUPPORT Contact MAGMATIC Service for any product related service and support needs. Also visit forums.elationlighting.com with questions, comments or suggestions. ELATION SERVICE USA - Monday - Friday 8:00am to 4:30pm PST 323-582-3322 | Fax 323-832-9142 | support@elationlighting.com...
No accessories should be shipped with the product. If any accessories are shipped with the product, Magmatic Effects shall have no liability what so ever for loss and/or or damage to any such accessories, nor for the safe return thereof.
(double-box and foam) that provides ample product protection for ground and/or air freight transit, and must be shipped freight pre-paid and insured to MAGMATIC in Los Angeles, CA or a MAGMATIC Authorized Service Center. The RMA number must be clearly written on the outside of the return box, and a brief description of the problem and the RMA number must be documented and included in the box.
This fixture is a sophisticated piece of electronic equipment. To guarantee smooth operation, it is important to follow all instructions and guidelines in this manual. Magmatic Effects is not responsible for injury and/or damages resulting from the misuse of this fixture due to the disregard of the information printed in this manual.
Page 8
S A F E T Y G U I D E L I N E S - DO NOT TOUCH the fixture housing during operation. Turn OFF the power and allow approximately 15 minutes for the fixture to cool down before servicing. - DO NOT shake fixture, and avoid brute force when installing and/or operating fixture.
Regular inspections are recommended to ensure proper function and extended life. There are no user serviceable parts inside this fixture, please refer all other service issues to an authorized MAGMATIC service technician. Should you need any spare parts, please order genuine parts from your local MAGMATIC dealer.
F I X T U R E O V E R V I E W 1. Lens 4. Power/Signal Cable Gland 2. Mounting Yoke Adjustment Nut 5. Power/Signal Cable 3. Mounting Yoke 6. Safety Cable Attachment Point...
I N S T A L L A T I O N I N S T R U C T I O N S FLAMMABLE MATERIAL WARNING Keep fixture minimum 5.0 feet (1.5m) away from flammable materials and/or pyrotechnics. ELECTRICAL CONNECTIONS A qualified electrician should be used for all electrical connections and/or installations.
Page 12
I N S T A L L A T I O N I N S T R U C T I O N S CLAMP INSTALLATION This fixture features an attachment point for a mounting clamp that is built in to the mounting yoke, as well as a safety cable attachment point located on the back face.
Page 13
I N S T A L L A T I O N I N S T R U C T I O N S PHOENIX CONNECTORS This fixture is designed for use with the MAGMATIC Prisma Driver 8. A Phoenix connector is included with this fixture, and may be used to connect this fixture to the driver.
S P E C I F I C A T I O N S SOURCE (7) 2W High Power UV Diode LEDs 20,000 Hour Average LED Life* *Test lab conditions. May vary depending on several factors including but not limited to: Environmental Conditions, Power/Voltage, Usage Patterns (On-Off Cycling), Control, and Dimming.
Need help?
Do you have a question about the Prisma Mini PAR 20 and is the answer not in the manual?
Questions and answers