Warning Plates On The Turbocharger; Safe Operation And Maintenance - ABB TPS44-F Series Operation Manual

Operation Manual / TPS44-F.. - TPS61-F..
2 Safety / 2.5 Warning plates on the turbocharger

2.5 Warning plates on the turbocharger

2.6 Safe operation and maintenance

© Copyright 2020 . All rights reserved.
Warning plates are attached to the turbocharger at the following places:
If warning plates are not present at the intended places or are not
legible, then proceed as follows:
Order new warning plates from ABB Turbocharging Service Stations.
u
Remove unreadable warning plates.
u
Clean and degrease surfaces provided for warning plates.
u
Attach new warning plates.
u
Uninsulated turbochargers
When uninsulated turbochargers are delivered to the engine builder, the
warning plates must be subsequently attached to the insulation. This is
the responsibility of the engine builder.
The instructions specified in this section are for the safety of personnel.
Together with the instructions in the Hazards during operation and
maintenance section, they allow the user to safely use the turbocharger.
HZTL2412_EN Rev.G March 2020