Download Print this page

KEUCO Edition 400 51516 010250 Mounting Instruction page 3

Advertisement

Available languages

Available languages

  • ENGLISH, page 3
These instructions are for both the installer for
installation and the user for operation and main-
tenance of the product. After installation, please
hand them over to the user to keep.
Symbols and explanations
Attention! Warning against bodily injury or
damage to property.
Note, tip or reference
Correct installation/test of functionality
Incorrect installation
Observe installation details
Cold water
Water fl ow
Intended use
Single lever mixer tap for use in bathrooms
and WCs. Operation possible with pressure
tanks and thermally and hydraulically controlled
instantaneous water heaters. Operation with
unpressurised tanks (open water heaters) is not
possible!
Operation only with potable water.
WARNING -
This product can expose you to chemicals
including Nickel and/or Lead, which is/are known
to the State of California to cause cancer/birth
defects or other reproductive harm.
For more information go to:
www.P65Warnings.ca.gov
Important information, please read!
Hot water
No water fl ow
California Prop 65
.
Technical specifi cations
– Flow at 60 psi pressure:
Installation dimensions, refer to page 2
Installation, refer to picture 1 on page 6
Flush potable water pipes thoroughly before and
after installation.
Use only neutrally netting silicone.
Test connections for leaks with water pressure.
Operation, refer picture 11 and 12 on page 7
Servicing, refer to picture 13 and 14 on page 8
Assemble in reverse order.
– Cartridge nut torque:
For spare parts with order numbers, refer to page 11.
To obtain warranty repair or replacement Ser-
vice, please contact KEUCO Managment Inc.
Service at: offi ce-usa@keuco.com.
For warranty and care information please refer
to the attached warranty and care instruc-
tions.
US
approx. 1.2 gpm
5.9 - 7.4 lbf ft
3

Advertisement

loading