Mobile Data - Huawei P40 Pro User Manual

2
In the list of Paired devices, touch
then touch Unpair.

Mobile Data

Connect to Mobile Data
1
Make sure that mobile data is available on your SIM card.
2
Connect to mobile data using either of the following methods:
Swipe down from the status bar to open the notification panel, then swipe down
•
further to show all shortcut switches. Touch
Go to Settings > Mobile network > Mobile data and enable Mobile data.
•
To conserve battery power and reduce data usage, disable the mobile data service when you
don't need it.
Enable 5G
5G is only available in some countries and regions.
•
Not all devices support 5G.
•
5G refers to the fifth generation of mobile communications technology. Compared with a 4G
network, a 5G network has a higher data transmission rate and a shorter delay.
When two SIM cards are inserted, only the default mobile data SIM will support 5G, while
the other will only support 4G/3G/2G.
1
5G service depends on the support of your mobile carrier and its deployment of relevant
services. Please contact your carrier to activate the 5G service.
2
If your phone has two SIM cards inserted, go to
management and set SIM 1 or SIM 2 as the default mobile data SIM.
3
Go to Settings > Mobile network > Mobile data and enable 5G for the default
mobile data SIM.
5G service may be unavailable in certain areas due to frequency interference in the carrier
network.
Manage SIM Cards
You can enable or disable SIM cards and name them for easier identification.
Enable or Disable a SIM Card
Go to Settings > Mobile network > SIM management, and turn the switch for a SIM
card on or off according to your preferences.
next to the name of the device you wish to unpair,
to enable Mobile data.
Settings > Mobile network > SIM
Settings
154