Advertisement
•
Loosen and remove the headset compression bolt and cap.
Note: Headset compression bolts and caps vary. Some styles
require an allen wrench, some require a ratchet and some require a
closed/open end wrench or an adjustable wrench.
Installing the new stem
•
Loosen the pinch bolts and slide the new stem down onto the
fork steerer tube.
These instructions are to be used as a guide only. Improperly installed parts may lead to severe injury or harm. We strongly recommend that
a properly trained bike mechanic handle all installations, adjustments and repairs on your bike. As always...Ride Safe!
AMain.com Inc.
Front Load Stem Installation
•
Slide the old stem upwards to remove it from the fork steerer
tube.
1-844-970-4269
www.danscomp.com
Page 2
Advertisement
