DMP Electronics 1148-G Installation Manual

1148-G PERSONAL PENDANT
Installation Guide
Figure 1: 1148-G Personal Pendant
DESCRIPTION
The 1148 Personal Pendant is a
one-button, wireless emergency
transmitter designed to be worn
as a wristband or on a break-away
lanyard. The 1148 may be used to
activate an event at the receiver.
The 1148 features a permanently
sealed, water-resistant design and
includes a Status LED to provide
visual indication that a message
has been transmitted and received
by the receiver. The 1148 operates
using a pre-installed non-removable
battery.
Compatibility
• All DMP 1100 Series Wireless
Receivers and Panels
What is Included?
• One 1148 Personal Pendant
• Wristband
• Break-Away Lanyard
1
USE AS WRISTBAND OR LANYARD
The 1148 Personal Pendant can be placed on a wristband or
lanyard. The wristband or lanyard clips are only inserted in
one direction. See Figures 2 and 3. The wristband clips can
be removed by pulling the clip in the opposite direction. Once
inserted the lanyard clips cannot be removed.
Wristband Clip
Figure 2: Wristband Mounting
Wristband:
1. Slide the wristband clip into the slots. See Figure 2.
2. Adjust the wristband to fit your wrist and trim excess band
length using scissors by cutting along the thinned area
between the clasp holes for a custom fit. See Figure 4.
Lanyard:
1. Slide the lanyard mount into the slots. See Figure 3.
2. Place the lanyard around your neck and snap together the
break-away clasp. See Figure 5.
3. Adjust the length of the lanyard to fit using the slide. See
Figure 5.
Figure 4: 1148 Personal Pendant
with Wristband
Lanyard Clip
Wristband Clip
Figure 3: Lanyard Mounting
Cut to length
Figure 5: 1148 Personal Pendant
Lanyard Clip
Clasp
Slide
with Lanyard