Bartell Global TS78 Owner's Manual page 21

RIDE-ON FAMILY
OWNER'S MANUAL
TS96:
1. Remove belt cover from the machine to
expose the drive components. (Figure 6)
2. Look for the threaded hole on the driven
pulley (near the center) and screw in an
M6 bolt to open the pulley. A 35 mm bolt is
used for this example.
3. Remove the belt from the opened pulley.
Figure 6
M6 threaded hole
Figure 7
Figure 8
20
OIPB – B19007
Driven Pulley