Download
Share
Print this page
Blofield Big Blo 1 Manual
  1. Manuals
  2. Brands
  3. Blofield Manuals
  4. Indoor Furnishing
  5. Big Blo 1
  6. Manual

Blofield Big Blo 1 Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
BB1 Consumer Manual
Version 2.2
© 2012 Blofield, The Netherlands
www.blofield.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the Big Blo 1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Blofield Big Blo 1

Summary of Contents for Blofield Big Blo 1

  • Page 1 BB1 Consumer Manual Version 2.2 © 2012 Blofield, The Netherlands www.blofield.com...
  • Page 2 M a n u a l f o r B i g Blo 1...
  • Page 3 Thank you for purchasing your Blofield® Big Blo 1. In a few minutes you will be able to enjoy your new Blofield®. It is your responsibility to carefully read and use this manual, which contains important information concerning your safety and the maintenance of this product. We recommend that you keep the manual for future reference. We hope you enjoy your Blofield®! www.blofield.com C on t en t Important information 1 - Inflating the Blofield Preparation The chair The cushion 2 - Deflating the Blofield The chair The cushion 3 - Folding 4 - Maintenance 5 - Problem solving 6 - Warranty...
  • Page 4 I m p or ta n t i nf or ma t i on Please read all safety instruction carefully in order to prevent injury. Warning: The Blofield® is not a toy or a bouncing pillow. Warning: The pump is an electrical product, not a toy. To avoid the risk of injury, it is not allowed to play with the pump. Do not use the electrical pump near water and do not bring the pump in contact with water. Remove the plug from the socket when the pump is not being used. Warning: After inflating, store the pump outside the reach of children. Warning: Do not use a compressor to inflate your Blofield®. Only use pumps delivered by Blofield®. • The product is not designed to be used in water, or as a life-saving appliance. • In no event shall Blofield® be liable for any direct, indirect, punitive, incidental, special consequential damages or personal injuries arising out of or connected with the misuse of it’s products. • When using the Blofield®, place it in a safe environment and check this for sharp edges, stair steps or breakable objects. Only use on flat surfaces. • Despite the nylon reinforcements on the bottom of the Blofield®, it is necessary to remove all sharp objects from the area where the chair will be inflated and used. Do not use the Blofield® on a rough...
  • Page 5 1 - I nf la ti n g t h e B l o f iel d: Prepa ra t i on Please read the following points carefully before inflating your Blofield Big Blo 1. The following parts must be present: - chair - cushion...
  • Page 6 C o nnect t he h ose to th e p ump Air in Air out For inflating, connect the hose to the pump at AIR IN. D isco nnect t he nozz l e f ir st, befo re sw it ch i ng o ff th e p u m p When inflating the Blofield, always disconnect the nozzle from the valve first, and then turn off the pump, otherwise the chair will deflate.
  • Page 7 1 - I nf l at i n g t h e B l ofi el d: t he ch ai r S tep 1: Twi st ope n th e va l ve -caps Unfold the chair, open the valve cover at the back of the chair, and twist open valve caps A and B. S tep 2: Infla te A-c h a mb er 7 5 % inflate Connect the nozzle of the hose to valve A. Turn on the pump, the main volume of the chair will now be inflated. Partially inflate the main volume, to 75 %. This will take approximately 1 minutes.
  • Page 8 S tep 3: in fla te B-c h a mb e r 1 0 0 % inflate 100% Now connect the nozzle to valve B to inflate the “chesterfield-effect”. Fully inflate this volume (100%). This will take approximately 30 seconds. S tep 4: in fla te A- ch a mb e r 1 0 0 % inflate 100% Connect the nozzle to valve A again, en inflate the main volume to 100 %. This will take approximately 25 seconds. Remove the nozzle from the valve and turn off the pump. Then, place the valve caps on the...
  • Page 9 1 - I nfl at i n g th e B l o f i el d: t h e cu sh i on St ep 1: Twi st op en t he va l ve -caps Unfold the cushion, and twist open valve caps A and B. S tep 2: i nfl at e A-c ha m be r 75 % inflate Connect the nozzle of the hose to the A valve. Turn on the pump, the main volume of the cushion will now...
  • Page 10 S tep 4: i nfl at e A-c ha m be r 10 0 % inflate 100% Connect the nozzle to valve A again, and inflate the main volume to 100%. This will take approximately 15 seconds. Remove the nozzle from the valve and turn off the pump. S tep 5: fi ni sh Place the valve caps on the valves. Place the cushion on the chair. Push the cushion back in the chair as far as possible without the cushion’s velcro touching the chair, then push the cushion down. Should you encounter any problems while inflating your Blofield®, we direct you to chapter 5 - Problem solving (page 16).
  • Page 11 2 - D e f l at i n g t h e B l ofi el d: t h e c hai r St ep 1: Twi st off t he va l ve caps Twist off valve caps A and B.
  • Page 12 S t ep 5: defl a ti ng ch a mb e r B deflate Air in Air out Check if the hose is connected to the pump at ‘AIR OUT’. Connect the nozzle of the hose to valve B of the chair. Turn on the pump, the “chesterfield-effect” will now be sucked vacuum. This will take between 50 - 60 seconds. Keep the pump switched on when deconnecting the nozzle of the hose from the valve. S tep 6: def la ti ng c ha mb e r A deflate Now connect the nozzle of the hose to valve A. The main volume will now be sucked vacuum. This will take about 1 minute. Disconnect the nozzle from the valve and turn off the pump. At last, place the valve caps back on the valves. The Blofield® is now completely empty and can be folded.
  • Page 13 2 - Def l at i n g t h e B l ofi el d: t he cu sh i on S t ep 1: Twist off th e va l ve ca ps Twist off valve caps A and B. S t ep 2: Press the val ve s to release air valve closed press the small knob release the knob;...
  • Page 14 S tep 3 : De fla te B-c h a mb er u sin g t h e p u m p deflate Check if the hose is connected to the pump at AIR OUT. Connect the nozzle of the pump to valve B of the cushion. Turn on the pump, the “chesterfield-effect”of the cushion will now be sucked vacuum. This will take approximately 10 - 15 seconds. S tep 4: D efla t e A -ch a mb e r us in g th e p u m p deflate Now connect the nozzle of the hose to valve A of the cushion. Turn on the pump, the main volume will now be sucked vacuum. Then, place the valve caps on the valves. This will take approximately 10 - 15...
  • Page 15 3 - F ol di ng S tep 1: F o ld i ng t he c u shi on Check if the caps are twisted on the valves, then fold the cushion as shown above. Step 2: F o ld i ng t he c h a ir Check if the caps are twisted on the valves, then fold the chair as shown above.
  • Page 16 4 - M a i n t en a nc e Cleaning • For routine cleaning, the easiest way to clean the Blofield is to deflate the B chamber of the chair and the cushion (while chamber A remains inflated). The Blofield will have a smooth surface, which makes is easier to clean. • The chair can be cleaned by using water and soap, or order the Blofield Chair cleaner at the customer service: service@blofield.com. This cleaning liquid is specially designed for Blofield®. Do not use aggressive or chemical detergents. • Blofield Chair Cleaner (750ml) instructions; For every dirty surfaces or ingrained dirt, spray the detergent onto the surface to be treated; leave for a few minutes and then wipe with the sponge. Rinse with water and dry with the cloth. • Using the Blofield Chair Cleaner, it is easy to remove the most common dirt. When the seating area has blue spots caused by jeans, try to remove the spots as soon as possible, preferably within 1 day. This blue ink can not be removed after a while without leavinig unremovable marks on the product. • Preferably, do not place the Blofield® under trees that drop resin, seeds or fruits: this can cause filthiness which is difficult, or impossible to remove. Packing • Do not pack the Blofield® when wet; let the chair dry first. • When packing the chair, make sure that all the valves are capped. Storing • If the sofa is not used for a long period of time, deflate the sofa and store it. Make sure the product is completely dry before folding and storing it.

  • Page 17: Problem Solving

    5 - P ro b le m so lvi ng If the Blofield® does not inflate • Always check if the hose is connected to the pump at AIR IN; inflating, and not to AIR OUT. The AIR OUT connection is to be used to suck the Blofield® vacuum. • When air leaks from the nozzle when inflating, check if the nozzle is attached properly, see page 4, step 2. If this is the case, then check if the nozzle contains a rubber ring; see page 4, top of the page. If this is damaged or missing, contact our Customer Service. If the Blofield® is deflating • If the sofa is losing air directly after you inflated it for the first time, check if the valves are closed, see next bullet. • Check the position of the small twist-knob on the valve. The small twist-knob of the valve must at all times be in an outward position when the valve is closed. When the twist- knob is turned inward, the valve is open and the chair will deflate immediately. Close the valve by pushing the twist- valve closed valve open knob and twisting it a quarter-turn. The twist-knob will now come out, in the right position. See page 4, step 1 for more details.

  • Page 18: Warranty

    6 - Wa r r an ty Blofield® guarantees the Blofield® chair and pump to be free from material and workmanship defects for a period of one (1) year from the date of its purchase by the customer. If, during this warranty period, the product proves defective due to improper materials or workmanship, please contact Blofield®. Blofield® will repair or replace the product based on the terms and conditions set out below, providing the product has been used for the purposes outlined in these manuals and operated according to all instructions provided. Conditions: I. The warranty will only be granted when the original invoice or sales receipt (indicating the date of purchase and dealer’s name) is presented together with the defective product. Blofield® reserves the right to refuse the warranty service if the above documents cannot be presented or if the information contained in them is incomplete or illegible. II. This warranty will not reimburse nor cover the damage or modification resulting from adaptations or adjustments which may be made to the product, without Blofield®‘s prior written consent. III. This warranty covers none of the following: a. Periodic maintenance, repair or replacement of parts due to normal wear and tear; b. Any adaptation or changes to upgrade the product from its normal purpose as described in the instruction manual, without Blofield®’s prior written consent; c. Transport costs and all risks associated with transport relating directly or indirectly to the warranty of the product; d. Damage resulting from: 1. Misuse, including but not limited to (a) failure to use the product for its normal purpose or in accordance with Blofield’s® instructions on the proper use and maintenance and (b) installation or use of the product in a manner inconsistent with the technical or safety standards in force in the country where it is used and (c) improper or incorrect installation of the product. 2. Repairs done by parties others than approved Blofield® staff or the customer himself; 3. Accidents, lightning, water, fire or any other cause beyond Blofield®’s control. IV. This warranty does not affect the customer’s statutory rights under applicable national laws in force, or the customer’s rights against the dealer arising from their sales/purchase contract. All customers must obtain an authorisation from Blofield® before returning a defective product. © 2009 - 2012 Blofield®. All rights reserved.
  • Page 19 7 - C o n tac t The Blofield Customer Service can be reached with the following information. Blofield Customer Service service@blofield.com www.blofield.com Environmental protections Electrical products are not to be processed as household refuse. When relevant facilities are available, you can have the product recycled. Ask your municipality or retailer for advice. Intellectual Property All intellectual property rights in relation to the product, including but not limited to, author’s rights and model rights, lie with the manufacturer, Blofield® and it is not allowed to either wholly or partially copy, make public or imitate the product without the expressed prior written consent from the legal owner. The name and the Blofield® logo are registered Blofield® trademarks.