Fostex MR-16HD Supplementary Manual page 11

How to use the cd-r/rw drive
Hide thumbs Also See for MR-16HD:
Table of Contents

Advertisement

<Note>:
If the selected stereo WAV file is larger
than the available disc space of the current CD-
R/RW disc, the following message pops up and
you cannot start writing (you can dismiss the
message by pressing the [MENU/ENTER]
knob). Change the disc to another one with
enough space and carry out the same opera-
tion procedure.
When writing is completed, "Completed!" is
shown and the disc access stops.
Now writing in the
Track at once mode is completed
Now writing in the
Disk at once mode is completed
7)
Press the [MENU/ENTER] knob.
The display returns to the USB HOST menu
screen, where "CD Burn " is highlighted.
When the disc is burned in the "Disk at once"
mode, it is automatically finalized after writing
is completed, and then ejected.
You can check the TOC information if desired.
See "Viewing the TOC information after finaliz-
ing" on page 14 for details.
When the disc is burned in the "Track at once"
mode, go to step 8 for finalizing the disc.
If you want to write more than one stereo WAV
file, repeat steps 4 through 6 above, and go to
step 8 for finalizing after writing all the desired
stereo WAV files.
MR16 Supplementary manual
8)
9)
11
(for the MR16 without a CD-R/RW drive)
You can check the TOC information any time
(both before and after finalizing). It is recom-
mended to check the remaining time (the re-
cordable time left) from the TOC information
whenever you write an additional stereo WAV
file (see "Viewing the TOC information" on page
13 for details).
Use the [MENU/ENTER] knob to select
"CD Finalize " and press the [MENU/ENTER]
knob.
The display now shows the confirmation screen
for finalizing, where "[CANCEL]" is highlighted.
To cancel finalizing, highlight "[CANCEL]" and
press the [MENU/ENTER] knob.
To start finalizing, highlight "[EXECUTE]" and
press the [MENU/ENTER] knob.
Use the [MENU/ENTER] knob to select
"[EXECUTE]" and press the [MENU/ENTER]
knob.
The display now shows the status of finalizing.
When finalizing is completed, "Completed" is
shown and the disc is automatically ejected from
the CD-R/RW drive.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mr16

Table of Contents