Ethernet; Wireless; Using Hdmi & Cec Function; Connecting With An Hdmi(Arc) Cable - Toshiba 32L5865 Series Owner's Manual

Ethernet

Connecting to the Internet
NOTES
• You get access to the Internet through your TV.
• We recommend to use a modem or router that supports Dynamic
Host Configuration Protocol(DHCP). Modems and routers that
support DHCP automatically provide the IP address, subnet mask,
gateway, and DNS, so you don't have to enter them manually.
Most home networks already have DHCP.
IP Sharer (Router)
(with DHCP server)
LAN
LAN Cable
Connecting to a Wired (Ethernet) Network
MENU ˃ Settings ˃ Network ˃ Network Configuration
You set the TV network by selecting Configuration and press
to enter the submenu.
Connection Type
Choose a wired network connection to access the Internet.
Ethernet
Display the network status.
IP Settings
Configure the IP setting for your network connection.

Wireless

Connecting to the Internet
NOTES
• You get access to the Internet through your TV.
• Connect to an available wireless network.
• Make sure that you have the wireless router's SSID and password
before attempting to connect.
Wireless Adapter
built-in the TV set
Connecting to a Wireless Network
MENU
˃ Settings ˃ Network ˃ Network Configuration
You set the TV network by selecting Configuration and press
to enter the submenu.
Connection Type
Choose a wireless network connection to access the Internet.
Advanced Settings
Configure the advanced wireless network settings for the TV.
Add
You can add wireless network.
Getting started
External Modem
(ADSL / VDSL / Cable TV)
LAN Cable Modem Cable
OK
button
Wireless Router
The LAN Port
on the Wall
(not provided)
LAN Cable
OK
button
Refresh
Refresh wireless network.
NOTES
• If no wireless router is found, select Add and enter the network
name in the SSID.
• If no wireless router is found, select Refresh.
Using HDMI & CEC Function
Use the TV's remote control to control external devices that are
connected to the TV by an HDMI cable. The external devices need to
support HDMI & CEC Function (HDMI-CEC).
Connecting an external device through HDMI & CEC Function
MENU ˃ Settings ˃ System > HDMI & CEC Functions > CEC
Control
1. Set CEC Control to On.
2. Connect an HDMI-CEC-compliant device to the TV.
3. Turn on the connected external device. The device is
automatically connected to the TV. After connection is finished,
you can access the menu of the connected device on your TV
screen using your TV remote and control the device.
NOTES
• HDMI cables must be used to connect HDMI CEC-compatible
devices to your TV.
• The HDMI CEC feature of the connected device must be turned
on.
• If you connect an HDMI device that is not HDMI CEC-compatible,
all the HDMI-CEC control features do not work.
• Depending on the connected HDMI device, the HDMI-CEC
Control feature may not work.
• The HDMI CEC feature are supported One Touch Play, Routing
Control, System Standby, Device OSD Name Transfer, Remote
Control Pass Through, Give Device Power Status, System Audio
Control.

Connecting with an HDMI(ARC) Cable

Connect an HDMI cable from an external digital audio system.
ARC enables the TV to directly output the digital sound through an
HDMI cable. Please note that it works only when the TV is connected
to the audio receiver that supports the ARC (Audio Return Channel)
function.
HDMI
ARC
NOTE
• When this port is used as the ARC function, it can be used as
signal input when DVD is connected to amplifier and the amplifier
is connected to the TV at the same time.(Some amplifiers may not
support series connection.)
8
Audio Amplifier/Speaker
HDMI
HDMI cable (not included)