Skoda SCALA 2019 Owner's Manual page 48

46 Lighting, windscreen wipers and washers ›
Fog lights
›
Attach the connector to the bulb, ensuring it clicks
into place.
Replace light bulbs
›
Change the bulb in the
socket.
›
Insert the socket with
the light bulb into the
headlight and turn it
clockwise to secure.
›
Insert the cover cap in-
to the wheel arch and
turn it clockwise to
secure.
›
Release the cover with
the bracket from the
tool kit and remove it.
›
Unscrew the screws
.
A
›
Remove the light.
›
Release the connector
and remove it from the
bulb.
›
Turn the bulb and re-
move it.
›
Insert the new bulb in-
to the light so that the
guide lugs on the bulb
are aligned with the
corresponding open-
ings in the light.
›
Turn the bulb clock-
wise to secure.
›
Insert the light again and tighten.
›
First insert the cover in the outer bumper area.
›
Press the cover in towards the centre of the
bumper until it clicks into place.
Rear turn signal
›
Remove the cover with
the bracket from the
tool kit.
›
Unscrew the screws
and remove the
A
light.
›
Press the lock mecha-
nisms on the connec-
tor and remove the
connector.
›
Turn and remove the
socket with the bulb.