Advertisement
Drive Medical Premium Seat Riser with
How to install the 12402 and 12403
Remove product from carton and READ ALL INSTRUCTIONS CAREFULLY
1.
before attempting to install product.
2. If installation of arms is desired:
a. Place one arm at a time into the arm holes on the raised toilet seat (the brass
buttons on the arm should be facing out, away from the toilet seat.)
b. Depress the brass button in the front of the arm while sliding the arm into
position. You will hear a "click" when the button is positioned properly. (You
will see the brass button pop through the position hole.)
c. Repeat process for back of arm.
d. Repeat process for the other arm.
e. To remove the arm, depress the brass button while pulling up on the arm.
Repeat for the back of the arm.
Removable Arms
12402/12403 Installation
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Drive Medical 12402
Summary of Contents for Drive Medical 12402
- Page 1 Drive Medical Premium Seat Riser with Removable Arms How to install the 12402 and 12403 12402/12403 Installation Remove product from carton and READ ALL INSTRUCTIONS CAREFULLY before attempting to install product. 2. If installation of arms is desired: a. Place one arm at a time into the arm holes on the raised toilet seat (the brass buttons on the arm should be facing out, away from the toilet seat.)
- Page 2 3. Remove existing toilet seat and lid from toilet. Position raised toilet seat correctly on rim of toilet bowl and center as necessary.
- Page 3 Attach original toilet seat to toilet bowl so it is positioned over raised toilet seat. Check for secure fit routinely before using product . User’s weight should be centered over toilet seat, not too forward or too far to one side, as unit may tip. 8.
Need help?
Do you have a question about the 12402 and is the answer not in the manual?
Questions and answers