Closing The Housing; Maintenance Instructions - Eneo VPT-40 Series Installation & Operating Manual

VIII Closing the housing
Attention must be paid when closing the housing that the
sealing rings are left in correct position and no wiring is
caught between the housing and cover edges.
Platform:
Dimensions: mm
eneo is a registered trademark of Videor E. Hartig GmbH
®
Exclusive distribution through specialised trade channels only.
Videor E. Hartig GmbH
Carl-Zeiss-Straße 8 · 63322 Rödermark/Germany
Tel. +49 (0) 6074 / 888-0 · Fax +49 (0) 6074 / 888-100
www.videor.com
IX Maintenance instructions
The main rubber gaskets should be replaced after opening
the housing for maintenance purposes to ensure protection
class IP66.
Base:
# 990505
Technical changes reserved.
© Copyright by Videor E. Hartig GmbH 09/2010