Catalogue 1.Overview ......................0 2. Assemble the miner ..................2 2.1 Check the miner before power on ..................2 2.2 Assemble&Operate ....................... 3 3.Operate the miner....................4 3.1 Enter the miner console......................4 3.2 Set up the pool ........................5 3.3 check the hashrate of the miner ...................
1.Overview Specifications T2TS-26T Part Number Sha256 Algorithm 422mm(L)*142mm(W)*201mm(H) Size (L×W×H) 9.06KG Net Weight 0--40 ℃(device junction temperature) Operating Temperature Ethernet Network Connection Typical Hashrate and Power Dissipation of the Four Mode:(You can set the mode follw the manual 3.5.1) Mode...
Blink---the hashboard overheat, please check the fans of the miner and the room temp Off---the hashboard don’t work, please try to reboot the miner or change the data cable. You can contact our after-sales team if the problem is still exist. Innosilicon After sales Team Email:minersupport@innosilicon.com.cn...
Press it 4—15 seconds, the miner will become to DHCP and the settings of the miner should be restore to default. Press it more than 20 seconds to switch the Dynamic (Static) IP to Static (Dynamic) RESET button: Your miner will restart if you press it.. Innosilicon After sales Team Email:minersupport@innosilicon.com.cn...
Put the tool on the PC which is connect with the same router with the miner, then double click the tool and choose the language. b.Report the miner IP Press the IPset button 1 to 2 seconds then the IP of the miner will show here Innosilicon After sales Team Email:minersupport@innosilicon.com.cn...
Enter the IP of the miner on the browser and press the Enter button. Chrome is the suggested browser. 3.2 Set up the pool You can use the suggested pool as below: 1 f2pool:stratum+tcp://btc-65536.f2pool.com:3333 2 poolin: stratum+tcp://btc-bj.ss.poolin.com:1800 stratum+tcp://btc-sz.ss.poolin.com:1800 3 ckpool:stratum+tcp://cn.ckpool.org:443 stratum+tcp://pool.ckpool.org:3333 4 btc.top:stratum+tcp://t2.btc.top:8888 stratum+tcp://bak.t2.btc.top:3333 5 slushpool:stratum+tcp://stratum.slushpool.com:3333 add the “stratum+tcp” will be better Innosilicon After sales Team Email:minersupport@innosilicon.com.cn...
3.3 check the hashrate of the miner After set up the pool, the miner will mine for you. 3.4 network configuration Innosilicon After sales Team Email:minersupport@innosilicon.com.cn...
3.5 Other pages 3.5.1 Change the operate mode There are 4 modes can be choosed, please click the “Save” after you set the mode. 3.5.2 Overview Innosilicon After sales Team Email:minersupport@innosilicon.com.cn...
Need help?
Do you have a question about the T2TS-26T and is the answer not in the manual?
Questions and answers